Congratulations on selecting the Vector™ INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUP-
PLY
.
Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit or items
that you are using it with.
In addition to a built-in 12-volt power supply, the
INDUSTRIAL 900™ JUMPSTART SYSTEM has several exclusive
features that set it apart from other similar devices. Primarily, it includes a special, built-in mounting (Patent Pending)
that allows for the simple, slide-in addition of a 110-volt AC power inverter (sold separately for Model VEC021;
included with Model VEC021AC). This will allow you to upgrade the basic unit to run 110-volt AC devices, while
still
maintaining the unit’s one-piece, compact styling.
The
INDUSTRIAL 900™ JUMPSTART SYSTEM is a convenient, easy-to-carry, completely portable system that is per-
fect for emergency situations and remote locations - when jumpstarting assistance or permanent utility power
sources are not available. It is also ideal for use with Vector™ 12-volt DC cordless, portable, rechargeable products.
For easy reference, this manual includes all information and specifications pertaining to the following Vector™
Model Numbers:
VEC021 INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY—Jumpstart System and 12-volt DC
power supply.
Note: You can purchase a Vector™
Power Force 150™ inverter (sold separately) to upgrade this model to the
same capabilities and specifications as the VEC021AC. (Contact Vector™ customer service for your newest retailer).
Use the VEC021 to:
-
Jumpstart
Any vehicle with a standard 12-volt DC battery system: boat, truck, car, airplane, RV, personal watercraft,
snowmobile, tractor, etc.
-
Operate: 12-volt DC
Fans, inflators, fluorescent work lights, cellular phones*, air compressors, inflators, spotlights, TVs, portable
radios, cassette or CD players, and more. *Can quick-charge a cellular phone by using the phone’s 12-volt DC
adapter cord.
VEC021AC INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY—Jumpstart System and 12-volt
DC/110-volt AC power supply (this model includes the detachable VEC023
Power Force 150™ inverter). Use the
VEC021AC as jumpstarter and 12-volt power supply (as above), PLUS:
Operate: 110-volt AC
Laptop computers and printers, fax machines, reading lamps, fans, small appliances and power hand tools (up to
1.5-amp), and more. Note: You can also
Recharge: 110-volt AC: Small 110-volt AC devices (laptop comput-
ers, cellular phones, camcorders, power tool batteries) that have an appropriate recharging adapter with a 110-volt
AC standard-type plug.
VEC023 Power Force 150™ inverter—included with Model VEC021 AC; sold separately for Model VEC021. This
150/300 watt power inverter is one in a series of the most advanced DC to AC inverters available today, providing
a convenient, portable source of electricity for running 110-volt AC appliances or accessories in areas where
permanent utility power is not available. Can be added to Model VEC021 for the additional convenience of a
110-volt AC power supply. Important information and specifications regarding the inverter are included in the back
of this manual.
VEC021/VEC021AC INDUSTRIAL SERIES™ 900 JUMPSTART SYSTEM & POWER SUPPLY
1. 12 VOLT DC CHARGER/
OUTPUT SOCKET, WITH
OVERLOAD PROTECTION
2. SAFETY ON/OFF POWER
SWITCH (NO KEY REQUIRED)
3. CHARGE STATUS BUTTON
4. HEAVY-DUTY #4AWG
WELDING QUALITY
JUMPER CABLES
5. HEAVY-DUTY, 600 AMP
COPPER CLAMPS
6. EXCLUSIVE, QUICK-RELEASE,
SPRING-LOADED CABLE
HOLSTERS
7. 110 VOLT AC/DC
CHARGER/POWER CORD
8. 12-VOLT DC/DC
CHARGER/POWER CORD
9. BUILT-IN WORK/
EMERGENCY LIGHT
10.WORK/EMERGENCY LIGHT
ON/OFF SWITCH
11.L.E.D. CHARGING/BATTERY
STATUS INDICATORS
1. BUILT-IN MOUNTING
(PATENT PENDING) FOR VEC023
POWER INVERTER
2. BUILT-IN CORD STORAGE
3. LOCK-IN/RELEASE BUTTON
4. VEC023 150 WATT POWER INVERTER
SLIDE-IN MOUNTING
Figure 1.
Figure 2.
4.
6.
2.
1.
10.
11.
3.
9.
5.
7.
8.
1
iii
To Next Page
Loading...
