EasyManua.ls Logo

Vector START-IT VEC022DSCC User Manual

Vector START-IT VEC022DSCC
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Jump-Start System
260 PSI AIR COMPRESSOR and
12 VOLT DC POWER SUPPLY
VEC022DSCC
IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR
PURCHASE CALL TOLL FREE (866) 584-5556. IN MOST
CASES A SERVICE REPRESENTATIVE CAN RESOLVE
YOUR PROBLEM OVER THE PHONE.
OWNER’S MANUAL AND
WARRANTY INFORMATION
KEY INFORMATION YOU SHOULD
KNOW:
Jump-start any engine system
with a standard 12 Volt DC
battery
Easy-to-read series of LED
charge indicators
Jump-Start System can be
recharged from any standard
110/120 Volt AC power
source
Built-in Area Light
BEFORE RETURNING THIS PRODUCT FOR ANY REASON,
PLEASE CALL TOLL FREE (866) 584-5504
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,
OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. READ
CAREFULLY BEFORE USE, AND RETAIN FOR FUTURE REFERENCE.
4140 S.W. 28th Way, Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
START-IT
Question and Answer IconNeed help?

Do you have a question about the Vector START-IT VEC022DSCC and is the answer not in the manual?

Vector START-IT VEC022DSCC Specifications

Battery IconBattery
battery typesealed, lead-acid, rechargeable, maintenance-free, 12 volt DC
boost ampere450 instantaneous cranking amps
Charging Adapters IconCharging Adapters
DC charging adapter12 volt DC
AC charging adapter110/120 volt AC (700mA, 12 volt DC output)
accessory outletself-resetting breaker 5 amps DC
Booster Cables IconBooster Cables
booster cablesheavy duty cable
copper clamps450 amp
Lighting IconLighting
area lightcold cathode fluorescent lamp (CCFL)

Summary

SAFETY INFORMATION

1. INTRODUCTION

2. FRONT PANEL

Indicators

Explains the meaning of various LED and display indicators on the front panel.

Function Modes

Details the operation of different function buttons and modes on the unit.

3. JUMP-START SYSTEM

3.1 JUMP-STARTING INSTRUCTIONS

Provides step-by-step guidance for safely jump-starting a vehicle.

4. CHARGING/RECHARGING

4.1 110/120 VOLT AC CHARGING

Details the procedure for recharging the unit using a standard AC wall outlet.

4.2 12 VOLT DC CHARGING

Explains how to recharge the unit using a vehicle's 12V DC accessory outlet.

4.3 REPLACE FUSE

Instructions on how to replace the fuse in the DC charging adapter plug.

4.4 ESTIMATED BATTERY LIFE

Provides estimated battery life based on usage and recharge cycles.

5. OPERATION AS A 12 VOLT PORTABLE POWER SUPPLY

6. AREA LIGHT

7. AIR COMPRESSOR/TIRE INFLATOR

7.1 WARNINGS FOR COMPRESSOR USE

Important safety precautions to follow when using the air compressor.

7.2 TIRE INFLATION OR PRODUCTS WITH A VALVE STEM

Step-by-step guide for inflating tires and items with valve stems.

7.3 INFLATING OTHER ARTICLES (WITHOUT VALVE STEM)

Instructions for inflating items like balls using adapter nozzles.

7.4 TYPICAL INFLATION TIMES

Approximate times required to inflate various items using the compressor.

8. REPLACEMENT PARTS

8.1 BATTERY REPLACEMENT

Information and recommendations for replacing the unit's internal battery.

8.2 BATTERY DISPOSAL:

Guidance on the proper recycling and disposal of the unit's battery.

9. SPECIFICATIONS

Related product manuals