Vectra Fitness Genisys 2761 User Manual

Vectra Fitness Genisys 2761

158 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

User Manual

Operation & Installation

Instructions for:

Therapy Systems

2761- Two Channel Combination System

2789- Four Channel Combination System

2764- Two Channel Electrotherapy System

2787- Four Channel Electrotherapy System

2871- Two Channel Electrotherapy System- no sEMG

2872- Two Channel Combination System- no sEMG

2873- Four Channel Electrotherapy System- no sEMG

2874- Four Channel Combination System- no sEMG

2875K- Two Channel Electrotherapy System with Cart- no sEMG

2876K- Two Channel Combination System with Cart- no sEMG

2877K- Four Channel Electrotherapy System with Cart- no sEMG

2878K- Four Channel Combination System with Cart- no sEMG

Optional Equipment

2775- Therapy System Cart (Unassembled)

2775ASY- Therapy System Cart (Assembled)

2767- NiMH Battery Module

2799- Dual Channel sEMG Module

27508 and 27079- User Remote Controls

2781- Channel 3/4 Electrotherapy Module

ISO 13485 CERTIFIED

Table of Contents

Questions and Answers:

G
Gerald BarkerAug 12, 2025
What to do if my Vectra Fitness Genisys 2761 Health Care Products unit shows 'Overcurrent'?
- M
  Maria HarperAug 12, 2025
  If your Vectra Fitness Health Care Products unit displays an 'Overcurrent' message, take these steps: * Check the electrodes and lead wires to ensure they are undamaged and properly connected to the system. * Verify the lead wires are correctly attached to the electrodes, and that the electrodes are making good contact with the treatment area. If the problem persists, replace the lead wires and electrodes.
W
Wanda DuarteAug 16, 2025
What to do if Vectra Fitness Health Care Products unit displays 'Shorted Lead Wires'?
- J
  Jennifer SmithAug 16, 2025
  If your Vectra Fitness Health Care Products unit displays 'Shorted Lead Wires', you should: * Check the electrodes and lead wires to make sure they are not damaged and are properly connected to the system. * Ensure the lead wires are correctly connected to the electrodes, and that the electrodes are making proper contact with the treatment area. If the issue continues, consider replacing the lead wires and electrodes.
S
Sandy NashAug 19, 2025
What to do if I have bad contact quality with Vectra Fitness Health Care Products?
- V
  Vincent CarrAug 20, 2025
  If you are experiencing bad contact quality with your Vectra Fitness Health Care Products, ensure the electrodes are making proper contact with the treatment area and that the lead wires are properly connected to the electrodes. If the problem persists, replace the electrodes and lead wires.

Vectra Fitness Genisys 2761 Specifications

General

Type	Home Gym
Press Arm	Yes
Leg Press	Yes
Weight Stack	210 lbs
Folding	No
Stations	Multiple Stations

Summary

Safety Precautions

Electrotherapy Indications, Contraindications, and Adverse Effects

Details therapeutic uses, restrictions, and potential side effects of electrotherapy.

sEMG + Stim Indications, Contraindications and Adverse Effects

Details therapeutic uses, restrictions, and side effects for sEMG + Stim.

Ultrasound Indications and Contraindications

Outlines therapeutic uses, restrictions, and precautions for ultrasound therapy.

Specifications

Waveform Specifications

Details specifications for various electrotherapy waveforms.

Ultrasound Specifications

Details specifications for ultrasound frequency, duty cycles, and output power.

PATIENT PREPARATION

Electrotherapy Patient Preparation

Steps for preparing the patient for electrotherapy treatment.

ULTRASOUND PATIENT PREPARATION

Steps for preparing the patient for ultrasound therapy.

sEMG and sEMG+Stim Patient Preparation

Steps for preparing the patient for sEMG and sEMG+Stim therapy.

OPERATION

GENERAL ELECTROTHERAPY WAVEFORM SET UP

Step-by-step guide for setting up electrotherapy waveforms.

ADJUSTING ELECTROTHERAPY CHANNEL PARAMETERS DURING TREATMENT

How to modify channel parameters during an active treatment.

ADJUSTING ULTRASOUND PARAMETERS DURING TREATMENT

How to modify ultrasound parameters during an active treatment.

INSTALLATION/REMOVAL

INSTALLATION- CHANNEL 3/4 ELECTROTHERAPY, NIMH BATTERY, AND LASER MODULE

Guide for installing optional modules onto the therapy system.

REMOVAL- CHANNEL 3/4 ELECTROTHERAPY, NIMH BATTERY, AND LASER MODULE

Guide for removing optional modules from the system.

INSTALLING sEMG MODULE

Guide for installing the sEMG module.

REMOVING sEMG MODULE

Guide for removing the sEMG module.

Mounting Therapy System to Therapy System Cart

Guide for mounting the therapy system onto the cart.

OPTION OPERATION

TROUBLESHOOTING

ERROR CODES

Lists and explains error codes, probable causes, and remedies.

MAINTENANCE

Related product manuals

Vectra Fitness Genisys 2872