Vectra Fitness Genisys 2872 User Manual (English)

Questions and Answers:

S
Susan MacdonaldAug 12, 2025
What to do if my Vectra Fitness Genisys 2872 unit shows 'Overcurrent'?
- S
  Susan GardnerAug 13, 2025
  If your Vectra Fitness Health Care Products unit displays an 'Overcurrent' message, take these steps: * Check the electrodes and lead wires to ensure they are undamaged and properly connected to the system. * Verify the lead wires are correctly attached to the electrodes, and that the electrodes are making good contact with the treatment area. If the problem persists, replace the lead wires and electrodes.
M
melanie90Aug 16, 2025
What to do if Vectra Fitness Health Care Products unit displays 'Shorted Lead Wires'?
- A
  andreahansonAug 16, 2025
  If your Vectra Fitness Health Care Products unit displays 'Shorted Lead Wires', you should: * Check the electrodes and lead wires to make sure they are not damaged and are properly connected to the system. * Ensure the lead wires are correctly connected to the electrodes, and that the electrodes are making proper contact with the treatment area. If the issue continues, consider replacing the lead wires and electrodes.
B
Brandon CohenAug 19, 2025
What to do if I have bad contact quality with Vectra Fitness Health Care Products?
- M
  Matthew BirdAug 19, 2025
  If you are experiencing bad contact quality with your Vectra Fitness Health Care Products, ensure the electrodes are making proper contact with the treatment area and that the lead wires are properly connected to the electrodes. If the problem persists, replace the electrodes and lead wires.

Vectra Fitness Genisys 2872 Specifications

General

Press Arm	Yes
Leg Press	Yes
Frame Material	Steel
Type	Home Gym
Folding	No

Related product manuals

Vectra Fitness Genisys 2761

158 pages

Vectra Fitness Genisys 2872 User Manual

Table of Contents

Questions and Answers:

Vectra Fitness Genisys 2872 Specifications

Related product manuals