Need help?Do you have a question about the Vectra Fitness ON-LINE 1500 and is the answer not in the manual?
General| Brand | Vectra Fitness |
|---|---|
| Model | ON-LINE 1500 |
| Category | Home Gym |
| Language | English |
Serious injury can occur if struck by falling weights or moving parts.
Cables are wear items; inspect and replace worn or frayed cables immediately to prevent breakage.
Follow instructions, consult physician, supervise children, keep clear of moving parts, inspect equipment, and use safely.
Connect the weight stack support to the main column and thread the cable over the pulley.
Bolt the press station platform to the frame using specified screws.
Install the weight stack support stringer loosely using the provided screws.
Install press arm tightly and connect the hook at the top of the press column to the press arm.
Align columns vertically and ensure press arm alignment, then tighten all frame member screws.
Tightly install the press handlebar using shoulder bolts and loctite as per instructions.
Attach the leg/ab seat bottom assembly to the leg/ab station using the specified screw.
Mount the leg/ab back onto the leg/ab station and firmly tighten the mounting screws.
Install butterfly arms on the pivot bar, ensuring correct orientation and securing with cotter pins.
Connect leg developer and abdominal crunch cables to main column cables, ensuring proper routing.
Adjust pulley bolt to lift stack slightly, then loosen to touch plates, checking selector pin insertion.
Ensure cables move freely during operation and immediately fix any rubbing issues.
Perform monthly checks on cables, bolts, accessories, selector pin, handlebars, bench, and leg developer for tightness and wear.
To Next Page