To Next PageTo Next Page
Need help?Do you have a question about the Vedeneyev M-14P and is the answer not in the manual?
General description and operational details of the ENGINE M-14P.
Detailed specifications for the M-14P engine and its components.
Procedures and guidelines for operating the engine.
Common problems encountered during engine operation and their solutions.
Maintenance procedures and task cards for the engine.
Appendices containing fuel and lubricant specifications.
List of task cards for engine removal and installation procedures.
Procedure for safely unpacking a new engine.
Procedure for depreservating the engine in field conditions.
Step-by-step procedure for removing the engine from the airplane.
Step-by-step procedure for installing the engine onto the airplane.
Lists materials and containers for engine preservation.
Procedures for preserving and storing the engine while installed.
Detailed preservation steps for long-term storage (up to one year).
Methods for removing corrosion from engine components.
Procedure for loading the dehydrator cartridge with silica-gel.
Environmental requirements for preservation and depreservation rooms.
Requirements for storerooms for engines and spares.
Guidelines for storing engines and spares at depots.
General overview of the engine front section.
Detailed construction of the engine front components.
Description of the gearbox housing.
Description of the airscrew shaft.
Description of the gearbox planetary train components.
Description of the speed governor drive mechanism.
General overview of the crank mechanism assembly.
Detailed construction of the crank mechanism components.
Description of the intermediate crankshaft.
Description of the crankshaft assembly.
Description of the connecting rod assembly.
General overview of the cylinder assembly.
Detailed construction of the cylinder assembly.
Description of the cylinder and its valve mechanism.
Description of the intake pipes.
Description of the piston assembly.
Description of the engine timing mechanism.
Description of the cylinder deflectors for cooling.
Troubleshooting steps for loss of cylinder compression.
General overview of the supercharging system.
Construction details of the supercharging system.
Description of the mixture collector.
Description of the diffuser component.
Description of the impeller.
Description of the blower impeller drive system.
General overview of engine lubrication.
Description of the engine lubrication system.
Description of the MN-14A oil pump.
Description of the engine oil sump.
Description of the filter with chip detector.
Troubleshooting steps for low engine oil pressure.
Troubleshooting for the chip detector warning lamp.
List of lubrication maintenance task cards.
Maintenance procedure for component removal.
Maintenance procedure for new oil pump depreservation.
Maintenance procedure for component installation.
Maintenance procedure for adjusting oil pressure.
General overview of the engine accessory drives.
Detailed description of accessory drive components.
Description of the crankcase rear cover.
Description of the drive gear.
Description of the vertical gearing in the rear cover.
Description of the generator drive assembly.
Description of the magneto drive assembly.
Description of tachometer and compressed air distributor drives.
Description of the compressor drive assembly.
Troubleshooting oil leaks from magneto attachment flange.
General overview of the engine fuel system.
Description of fuel system components.
Description and operation of the 702ML fuel pump.
Description and operation of the 8D2.966.064 fuel filter.
General overview of the AK-14P carburetor.
Description of carburetor components and functions.
Specifications for the AK-14P carburetor.
Construction details of the AK-14P carburetor.
Description of the carburetor body.
Description of the pressure regulator assembly.
Description of the carburetor link mechanism.
Description of the carburetor metering system.
Description of the carburetor idle needle system.
Procedure for fuel supply to the carburetor.
Description of the carburetor altitude control.
Description of the carburetor air manifold.
Description of the air acceleration pump.
Troubleshooting exhaust issues at carburetor idle rating.
Troubleshooting fuel leaks from the carburetor nozzle.
List of carburetor maintenance task cards.
Maintenance procedure for carburetor removal.
Maintenance procedure for depreservating a new carburetor.
Maintenance procedure for carburetor installation.
Procedure for adjusting carburetor idle speed.
Procedure for adjusting carburetor at main engine ratings.
Procedure for adjusting carburetor altitude control.
Procedure for adjusting the acceleration pump.
General overview of the engine ignition system.
Description of the ignition system components.
General overview of the M-9F magneto.
Description of the M-9F magneto.
Specifications for the M-9F magneto.
Troubleshooting magneto spark generation issues.
Troubleshooting magneto operation with selector switch off.
Troubleshooting for magneto misfiring spark plugs.
List of magneto maintenance task cards.
Maintenance procedure for new magneto depreservation.
Maintenance procedure for magneto installation.
Maintenance procedure for adjusting breaker point gap.
Maintenance for replacing distributor and harness cables.
Maintenance procedure for magneto removal.
General overview of spark distribution.
General overview of spark plugs.
Description of spark plug components and functions.
Spark plug construction details.
Specifications for spark plugs.
Troubleshooting for missing or absent sparks.
Troubleshooting for increased electrode gap.
Troubleshooting for carbon deposit, soot, and oil fouling.
List of spark plug maintenance task cards.
Maintenance procedure for spark plug removal.
Maintenance procedure for spark plug installation.
General overview of the starting system.
Description of the AK-50A airborne air compressor.
General overview of the air compressor.
Description of the air compressor components.
Specifications for the air compressor.
Construction details of the air compressor.
Operation procedures for the air compressor.
Troubleshooting compressor pressure issues in the airplane bottle.
List of starting system maintenance task cards.
Maintenance procedure for starting system component removal.
Maintenance for new compressor depreservation.
Maintenance procedure for starting system component installation.
General overview of the spinning system.
Construction of the spinning system components.
Description of the compressed air distributor.
Description of the starting valve.
Description of the fuel priming system.
Troubleshooting airscrew rotation issues during starting.
List of spinning system maintenance task cards.
Maintenance procedure for spinning system component removal.
Maintenance for distributor depreservation.
Maintenance for housing installation.
Procedure for adjusting the compressed air distributor.
Procedure for installing the distributor housing cover.
General overview of the GSR-3000M generator.
Description of the generator.
Generator construction details.
Specifications for the GSR-3000M generator.
Generator operation principles.
Troubleshooting for generator producing no voltage.
Troubleshooting for low or dropping generator voltage under load.
Troubleshooting heavy sparking and commutator burning.
List of generator maintenance task cards.
Maintenance procedure for generator servicing.
Maintenance procedure for generator removal and installation.
Maintenance procedure for generator inspection and check.
General overview of the constant speed governor.
Description of the constant speed governor.
Specifications for the constant speed governor.
Construction details of the constant speed governor.
Description of the governor body assembly.
Description of the governor oil pump body.
Description of the governor transmission body.
Operation of the constant speed governor.
Procedures for ensuring constant airscrew and engine speed.
Procedures for manually changing airscrew and engine speed.
Method for changing engine rotational speed.
Procedure to shift airscrew blades to lower pitch.
Procedure to shift airscrew blades to higher pitch.
List of governor maintenance task cards.
Maintenance procedure for governor removal.
Maintenance for new governor depreservation.
Maintenance procedure for governor installation.
Procedure for adjusting the governor on the engine.
General