10.
Set the energy level. If you want to change the energy level setting, press the ENERGY
LEVEL SETTING BUTTONS using the “-“ or “+” to respectively decrease or increase the
energy level, until the desired energy level is set and represented by the energy level
indicator lights (For details see “Energy Level” section inside this user manual).
• Place the TREATMENT SURFACE on the skin and press the trigger to deliver one
pulse.
• If you did not experience abnormal discomfort press the + button once and deliver
one pulse on a dierent spot at energy level 2.
• Continue testing at increased energy levels until you have reached the highest level
that you feel comfortable with. If within one hour you experience no adverse
eects, you can start your full treatment at that energy level.
• Repeat this test for each body part you intend to treat.
Skin Test
Treat with Veet Infini’Silk™ Pro safely and properly!
5. Choose areas to treat that have not had recent exposure to the sun.
6.
The skin of the treatment areas should be shaved, clean, dry and free of any powders,
antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out before using the
Veet Infini’Silk™ Pro device. Shaving is an important step to get the results you want
!
7. Press the ON/STBY SWITCH. The POWER ON INDICATOR LIGHT (orange) will turn
on and a fan sound (similar to the sound of a hairdryer) will start.
8. Approximately 3.5 seconds after pressing the ON/STBY SWITCH, the two READY
INDICATOR LIGHTS (green) will turn on. The device is then ready for you to trigger
the first pulse at the lowest energy level.
9. Before each treatment, choose the desired energy level.
Veet Infini’Silk™ Pro oers 5 levels of energy from 1 (the lowest) to 5 (the highest).
To choose the right energy level for your first treatment, test each treatment area
separately:
To Next Page
Loading...
