Veet Infini’Silk PRO - User Manual

123 pages

Save Page as PDF

To Next Page

English

Quick Start

Plan your Veet Inﬁni’Silk™ Pro hair removal treatments for best results.

Treatments 1-4 – plan two weeks apart

Treatments 5-7 – plan four weeks apart

Treatments 8 + – treat as needed, until desired results are achieved.

Set up Veet Inﬁni’Silk™ Pro!

1. Remove Veet Inﬁni’Silk™ Pro Pulse Light Technology Device and other components

from the box.

2. Verify that the LAMP CARTRIDGE for legs and body is inserted properly at the tip

of the device. If you would like to use the smaller, precision lamp cartridge for use

on upper lip, cheek, or chin, follow the replacement instructions.

3. Plug the ADAPTOR cord into the Veet Inﬁni’Silk™ Pro HAIR REMOVAL DEVICE socket.

4. Plug the ADAPTOR into an electrical outlet. The STAND BY INDICATOR LIGHT will

turn on.

Your Veet Inﬁni’Silk™ Pro is now ready to start.

Congratulations on your Veet Inﬁni’Silk™ Pro purchase.

As Veet Inﬁni’Silk™ Pro is a powerful device, it should be used with special attention to

safety. Please read the entire user manual before using the product, and adhere to the

instructions regarding additional conditions that may warrant safety precautions and

warnings.

• Only use this product on lighter skin tones. Do not use Veet Inﬁni’Silk™ Pro on

naturally dark skin.

• Do not use on tanned skin or immediately after sun exposure.

• Do not use on permanent make-up or tattooed skin areas.

• Keep away from your eyes!

Note! Veet Inﬁni’Silk™ Pro may not be eective on naturally white and light hair.

Main Page

Other manuals for Veet Infini’Silk PRO

User Manual80 pages

Questions and Answers

M
Marc MillerOct 29, 2025
What to do if a flash is not emitted when I press the flash button on my Veet Electric Shaver?
- M
  Matthew BondOct 29, 2025
  If a flash is not emitted when you press the flash button, several factors could be at play: * Ensure the treatment panel is making good contact with your skin, and that the ready mode indicator light is blinking. The device needs to be attached to the skin in a balanced and stable manner. * If the skin tone indicator light is blinking, your skin may be too dark for the device. Try using the device on another part of your body. * Check the cartridge replacement indicator; if it's on, replace the lamp cartridge with a new one after unplugging the appliance. * Ensure the ready state indicator light is on. If it remains off after 10 seconds, try switching the device off and on again by double-clicking the power/pause button. * Examine the system warning indicator light. If it’s on,...

Summary

Quick Start Guide

Set up Veet InfiniSilk Pro!

Steps for setting up the Veet Infini'Silk™ Pro hair removal device.

Before You Start

Veet InfiniSilk Pro Device Description

Details about the components and features of the Veet Infini'Silk™ Pro device.

Package Contents

List of items included in the Veet Infini'Silk™ Pro product package.

Lamp Cartridge Information

Information about the device's lamp cartridge and its usable lifespan.

Intended Use of Veet InfiniSilk Pro

Veet InfiniSilk Pro Safety Precautions

Contraindications for Veet InfiniSilk Pro Use

When to Avoid Veet InfiniSilk Pro Use

Conditions Prohibiting Veet InfiniSilk Pro Use

Potential Side Effects of Veet InfiniSilk Pro

Veet InfiniSilk Pro Hair Reduction Results

Getting Started with Veet InfiniSilk Pro

User Experience During Treatment

Describes the user experience during Veet Infini'Silk™ Pro hair removal sessions.

Post-Treatment Care and Storage

Instructions for post-treatment care and proper storage of the device.

Veet InfiniSilk Pro Maintenance

Cleaning the Device

Steps for cleaning the Veet Infini'Silk™ Pro device after each hair removal session.

Replacing the Lamp Cartridge

Guide for replacing the Veet Infini'Silk™ Pro device's lamp cartridge.

Veet InfiniSilk Pro Troubleshooting Guide

Troubleshooting: Device Not Starting

Solutions for when the Veet Infini'Silk™ Pro device fails to power on.

Troubleshooting: No Light Pulse

Troubleshooting steps when the Veet Infini'Silk™ Pro does not emit a light pulse.

Veet InfiniSilk Pro Technical Specifications

Product Labelling and Disposal Information

Veet Infini’Silk PRO Specifications

General

Brand	Veet
Product Name	Infini’Silk PRO
Category	Hair Removal System
Technology	Intense Pulsed Light (IPL)
Skin Tone Sensor	Yes
Treatment Levels	5
Corded/Cordless	Corded
Type	IPL Hair Removal Device
Number of Tweezers	Not Applicable
Wet and Dry Use	No
Cordless	No
Massage Rollers	No
Usage	Home Use
Treatment Areas	Legs, arms, underarms, bikini line, face
Power Source	Electric