Vega Securo - Administrator Mode

Translation Operating instructions – Safe
18
7.2 Administrator mode
The administrator mode is intended exclusively for personnel.
Ü Make sure that the administrator code is accessible exclusively to personnel.
In administrator mode, it is possible to
è open the safe
è change the administrator code.
è view the access protocols.
è set the date and time.
Activate administrator mode
Ü Press the CANCEL button 2x in direct sequence.
The display shows SUPER.
Ü Enter the administrator code.
Ü Confirm with the ENTER button.
Administrator mode is activated.
i After entering a wrong code three times in a row, entering the code again is only
possible after waiting about 5 minutes.
Changing the administrator code
Ü Activate administrator mode.
Ü Enter operating code 01.
Ü Confirm with the ENTER button.
The display shows NEW.
è Enter a new administrator code (6 digits).
Ü Confirm with the ENTER button.
The display shows REPEAT.
è Re-enter new administrator code.
Ü Confirm with theENTER button.
The display shows GOOD.
Administrator code has been changed.
Opening the safe
Ü Activate administrator mode.
Ü Enter operating code 00.
Ü Confirm with the ENTER button.
Door opens.
Closing the safe
Ü Close the door.
Ü Press the ENTER button.