Vega Securo - Faults;Troubleshooting

Translation Operating instructions – Safe
19
Door is locked.
Viewing the opening log
Ü Activate administrator mode.
Ü Enter operating code 09.
Ü Confirm with the ENTER button. Date of the last opening is displayed.
Ü Press key 6. Time and display of the opening mode of the last opening are
displayed.
Display
Opening mode
1
Administrator code
8
Guest code
9
Main key
Other opening logs can be displayed:
Button
2 Date previous opening
6 Time and mode of opening
8 Date next opening
6 Time and mode of opening
5 Date last opening
6 Time and mode of opening
CANCEL Exit mode
7.3 Faults/troubleshooting
Ü Have any malfunctions of the appliance repaired exclusively by qualified person-
nel.
Resetting the administrator code
If you forgot the administrator code, it is possible to reset the code to factory setting.
To reset the administrator code:
Ü Open the safe with the master key or the guest code.
Ü Remove the back cover of the door (with 3 screws).
Ü Press and hold the RESET button on the operating panel for about 7 seconds.
The display shows RESET.
Ü Release button.
Ü Re-install back cover.