Need help?Do you have a question about the Vega VEGADIS 62 and is the answer not in the manual?
Provides information for mounting, connection, setup, maintenance, and fault rectification.
Manual is directed to trained qualified personnel.
Explains symbols like Information, Caution, Warning, Danger, Ex applications, List, Action, Sequence.
Operations must be done by trained personnel. PPE must be worn.
VEGADIS 62 is for 4-20mA/HART circuits. Operational reliability depends on proper use.
Incorrect use can lead to hazards like vessel overfill or damage.
Instrument must be operated in a flawless condition. User responsible for safety measures and regulations.
Device fulfills EC guidelines and CE marking confirms testing. Certificate available online.
Device fulfills the requirements of the applicable NAMUR recommendations.
Details environmental protection duties and ISO 14001 certification, referencing specific chapters.
Describes the housing, terminal insert, and adjustment module. Mentions mounting adapters.
Explains the data on the type label for identification and use of the instrument.
Lists items included in delivery: unit, documentation, safety instructions, certificates.
Explains VEGADIS 62 as an external indicating/adjustment unit for 4-20mA/HART sensors.
Used for remote indication/adjustment, pressure compensation, and external indication.
Describes Basic mode, HART standard, and HART multidrop modes of operation.
Details packaging, transport protection, and storage conditions.
Provides instructions for transport and handling of the instrument.
Specifies conditions for storing the instrument packages.
Use recommended cables, tighten cable gland, protect against moisture penetration.
Details procedures for wall mounting and carrier rail mounting.
Describes the procedure for mounting the unit on a tube.
Covers safety, voltage supply, connection cable, gland, screening, and grounding.
Describes spring-loaded terminals and module connection methods.
Provides step-by-step instructions for connecting the cable.
Details the steps required to safely remove the module.
Instructions for inserting wires into terminals and connecting screens.
Shows the electrical wiring diagram for the VEGADIS 62.
Illustrates simplified connection with a HART sensor and required resistance.
Shows simplified connection of VEGADIS 62 in a HART multidrop system.
Diagrams showing installation examples for one or multiple VEGADIS 62 in a multidrop system.
Illustrates connection to signal conditioning instruments like VEGAMET.
Describes the start-up process and HART communication initiation.
Explains the adjustment elements and key functions (↑, ESC, OK, ↓).
Guide to entering parameter adjustment mode and navigating menus.
Details how to change values using keys in editing mode.
Explains Basic mode and HART standard mode operation.
Describes the behavior of the VEGADIS 62 in HART multidrop mode.
Overview of adjustment menu sections: Measurement, Indication, Configuration.
Procedure for selecting units for measurement and adjustment.
Adjusting the initial value (zero point) of the measuring range.
Adjusting the final value (span) of the measuring range.
Setting the decimal point for the measuring range display.
Accepting the actual measured value as span setting.
Adjusting the zero point for the sensor.
Entering the integration time for damping the measured value.
Adjusting the HART address in multidrop mode.
Setting the unit for the digital indication display.
Locking the indication unit against sensor changes.
Setting the decimal point for the digital indication.
Activating the digital filter for signal smoothing.
Navigating to the alarm configuration settings.
Switching the alarm function on or off.
Setting the value for the minimum alarm threshold.
Setting the value for the maximum alarm threshold.
Accessing the stored minimum and maximum values.
Function to delete the stored minimum and maximum values.
Activating the cyclic display of min., max., and actual values.
Setting the user interface language.
Adjusting the display contrast level.
Resetting all digital indication settings to default values.
Programming a custom alphanumeric unit for the display.
Setting the threshold for the minimum failure message.
Setting the threshold for the maximum failure message.
Displays the current firmware version of the device.
Setting and managing passwords for protected functions.
Enabling early logout from the device after password entry.
Adjusting min./max. values, range begin/end, and decimal point for the sensor.
Scaling the indication using the 'USER' unit for custom display.
Detailed steps for custom indication scaling using the USER unit.
Re-activating HART communication for sensor adjustment correction.
Using external systems for adjustment and updating VEGADIS 62.
No specific maintenance is required for normal operation.
Lists HART error codes, their descriptions, and potential causes.
Troubleshooting common errors in the 4-20mA signal and their rectifications.
Contact information for VEGA service support.
Instructions for returning the instrument for repair and required documentation.
Steps for safely removing the instrument from its installation.
Guidelines for environmentally sound disposal of the instrument.
Covers general, supply circuit, measurement, and display specifications.
Specifies ambient temperature and storage/transport temperature limits.
Details cable gland and terminal specifications.
Lists protection ratings and overvoltage category.
Explains the HART protocol, FSK technology, and available commands.
Table mapping units to their corresponding HART codes.
Shows dimensional drawings for various VEGADIS 62 housing versions.
Shows dimensions and types of mounting adapters for the VEGADIS 62.
Information on global protection of VEGA product lines.
Statement regarding brands, trade, and company names.
Provides information for mounting, connection, setup, maintenance, and fault rectification.
Manual is directed to trained qualified personnel.
Explains symbols like Information, Caution, Warning, Danger, Ex applications, List, Action, Sequence.
Operations must be done by trained personnel. PPE must be worn.
VEGADIS 62 is for 4-20mA/HART circuits. Operational reliability depends on proper use.
Incorrect use can lead to hazards like vessel overfill or damage.
Instrument must be operated in a flawless condition. User responsible for safety measures and regulations.
Device fulfills EC guidelines and CE marking confirms testing. Certificate available online.
Device fulfills the requirements of the applicable NAMUR recommendations.
Details environmental protection duties and ISO 14001 certification, referencing specific chapters.
Describes the housing, terminal insert, and adjustment module. Mentions mounting adapters.
Explains the data on the type label for identification and use of the instrument.
Lists items included in delivery: unit, documentation, safety instructions, certificates.
Explains VEGADIS 62 as an external indicating/adjustment unit for 4-20mA/HART sensors.
Used for remote indication/adjustment, pressure compensation, and external indication.
Describes Basic mode, HART standard, and HART multidrop modes of operation.
Details packaging, transport protection, and storage conditions.
Provides instructions for transport and handling of the instrument.
Specifies conditions for storing the instrument packages.
Use recommended cables, tighten cable gland, protect against moisture penetration.
Details procedures for wall mounting and carrier rail mounting.
Describes the procedure for mounting the unit on a tube.
Covers safety, voltage supply, connection cable, gland, screening, and grounding.
Describes spring-loaded terminals and module connection methods.
Provides step-by-step instructions for connecting the cable.
Details the steps required to safely remove the module.
Instructions for inserting wires into terminals and connecting screens.
Shows the electrical wiring diagram for the VEGADIS 62.
Illustrates simplified connection with a HART sensor and required resistance.
Shows simplified connection of VEGADIS 62 in a HART multidrop system.
Diagrams showing installation examples for one or multiple VEGADIS 62 in a multidrop system.
Illustrates connection to signal conditioning instruments like VEGAMET.
Describes the start-up process and HART communication initiation.
Explains the adjustment elements and key functions (↑, ESC, OK, ↓).
Guide to entering parameter adjustment mode and navigating menus.
Details how to change values using keys in editing mode.
Explains Basic mode and HART standard mode operation.
Describes the behavior of the VEGADIS 62 in HART multidrop mode.
Overview of adjustment menu sections: Measurement, Indication, Configuration.
Procedure for selecting units for measurement and adjustment.
Adjusting the initial value (zero point) of the measuring range.
Adjusting the final value (span) of the measuring range.
Setting the decimal point for the measuring range display.
Accepting the actual measured value as span setting.
Adjusting the zero point for the sensor.
Entering the integration time for damping the measured value.
Adjusting the HART address in multidrop mode.
Setting the unit for the digital indication display.
Locking the indication unit against sensor changes.
Setting the decimal point for the digital indication.
Activating the digital filter for signal smoothing.
Navigating to the alarm configuration settings.
Switching the alarm function on or off.
Setting the value for the minimum alarm threshold.
Setting the value for the maximum alarm threshold.
Accessing the stored minimum and maximum values.
Function to delete the stored minimum and maximum values.
Activating the cyclic display of min., max., and actual values.
Setting the user interface language.
Adjusting the display contrast level.
Resetting all digital indication settings to default values.
Programming a custom alphanumeric unit for the display.
Setting the threshold for the minimum failure message.
Setting the threshold for the maximum failure message.
Displays the current firmware version of the device.
Setting and managing passwords for protected functions.
Enabling early logout from the device after password entry.
Adjusting min./max. values, range begin/end, and decimal point for the sensor.
Scaling the indication using the 'USER' unit for custom display.
Detailed steps for custom indication scaling using the USER unit.
Re-activating HART communication for sensor adjustment correction.
Using external systems for adjustment and updating VEGADIS 62.
No specific maintenance is required for normal operation.
Lists HART error codes, their descriptions, and potential causes.
Troubleshooting common errors in the 4-20mA signal and their rectifications.
Contact information for VEGA service support.
Instructions for returning the instrument for repair and required documentation.
Steps for safely removing the instrument from its installation.
Guidelines for environmentally sound disposal of the instrument.
Covers general, supply circuit, measurement, and display specifications.
Specifies ambient temperature and storage/transport temperature limits.
Details cable gland and terminal specifications.
Lists protection ratings and overvoltage category.
Explains the HART protocol, FSK technology, and available commands.
Table mapping units to their corresponding HART codes.
Shows dimensional drawings for various VEGADIS 62 housing versions.
Shows dimensions and types of mounting adapters for the VEGADIS 62.
Information on global protection of VEGA product lines.
Statement regarding brands, trade, and company names.
General| Touchscreen | Yes |
|---|---|
| Display Size | 15 inch |
| Display Type | TFT LCD |
| Resolution | 1024 x 768 |
| Communication Interfaces | USB |
| Touch Technology | Resistive |
To Next Page