Veho VFS-004 deluxe User Manual

-10-
5. Connecting the VFS-004 scanner
For first time users, do NOT plug the image copier
into computer while the holder is inserted in the
image copier. Please remove the film/slide holder
before connecting to the computer, and click
“calibrate” button to perform calibration the first time
the image copier is used.
1. Plug the USB cable of the scanner to the computer
properly. Once connected the power LED light will be
blue.
2. Insert the loaded film/slide holder properly into the
slot as shown.
(Insert through front entrance)
3. Click on the PhotoImpression 6 icon on the desktop
and you will see the following.

Veho VFS-004 deluxe Specifications

General

Brand	Veho
Model	VFS-004 deluxe
Category	Digital Imaging Accessories
Language	English