Veichi Electric AC60 series

Need help?

Do you have a question about the Veichi Electric AC60 series and is the answer not in the manual?

Summary

Chapter One: Safety Requirements and Cautions

1.1 Safety Definition

Defines 'Danger', 'Caution', and 'Note' for understanding safety instructions.

1.2 Safety Requirements and Cautions

Outlines safety precautions for installation, wiring, operation, and maintenance.

Chapter Three: Installation

3.1 Installation Environmental Requirements

Specifies ambient conditions like temperature, humidity, and location for installation.

3.3 Mounting Direction and Space

Details recommended installation orientation and required clearances.

Chapter Four: Frequency Inverter Wiring

4.1 Wiring Precautions

General precautions and guidelines for safe and correct electrical wiring.

4.2 Basic Wiring Diagram

Provides the main circuit and control circuit wiring diagrams.

4.3 Main Circuit Terminals

4.4 Electrical Specifications Recommendation

4.5 Control Circuit Terminals

Chapter Five: Keyboard Operation and Usage

5.1 Keyboard Layout and Function Specification

Details the layout and functions of both single and double display keyboards.

5.3 Keyboard Operation Modes

Chapter Six: Functional Parameter Table

6.1 Basic Parameters Table

Lists and describes basic operational parameters (E-01 to E-66).

6.2 Exterior Terminal Parameters

Chapter Seven: Function Detailed Specification

7.1 Basic Parameters Detailed Specification

Details various parameters including command, frequency, PID, and motor settings.

7.3 Special Functions Parameters

Chapter Eight: Abnormality Diagnoses and Processing

8.1 Fault Information and Troubleshooting

Lists common faults, possible reasons, and troubleshooting steps.

8.2 Common Fault and Processing Methods

Provides diagnostic flowcharts for common faults like over-current and over-voltage.

Chapter Nine: Overhaul and Maintenance

9.1 Inspection and Maintenance

9.2 Components Needed Periodic Replace