veise HDWS-772S231M1-10W - User Manual

DC12V
DC:8-32V
Cable Interface Definition
Monitor
Camera
Red Power
Black Ground
Red Power
Black Ground
Brown TIRG1
Blue TIRG2
Applications
720P Digital wireless system
User Manual
Features
★ABS monitor housing endure high temperature.
★7" High Resolution color 1024RGB(H) X 600(V) TFT-LCD.
★ Power input:8V-32V DC.
★Monitor circuit has protector for battery reverse(+/-).
★LED backlight display with constant voltage constant current circuit protection. It can solve
LED working temperature problems (the limit of LED backlight’s current) and prolong life.
★Monitor OSD menu can set each channel camera image in 4 mode NOR/MIR/UP/DOWN;the
priority for each mode; each trigger cable can be set to trigger to any display mode; time delay
setting.
★Two channels digital wireless signal transmission. It supports sub-screen and two screens.
★ 720P Wireless car camera waterproof stainless steel forklift level IP69K.

Summary

Applications

Cable Interface Definition

Features

Digital Wireless System Technical Parameters

Monitor Menu Operation Instructions

Code Settings

Enter menu, check code options, press confirm to start code, display code. Camera pairing takes 20 seconds.

Image Settings

Adjust brightness, contrast, color, and volume via menu options using left/right keys.

Mirror Settings

Set camera image to positive, mirror, vertical flip, or flip mirror for CAM1/CAM2.

Automatic Switch Mode Settings

Enable/disable automatic switching for CAM1/CAM2, set time from 5-45 seconds.

Function Settings

Switch between NTSC/PAL, control LED light source, and set reversing scale for CAM2.

Multi Screen Mode Display Settings

Configure screen display to switch between single and two-screen modes, defaults to two-screen.

veise HDWS-772S231M1-10W Specifications