What to do if Veit Brisay Varioline S have no suction or blowing?
If your Veit Brisay Ironing Centers have no suction or blowing, it could be due to a few reasons. First, the thermal protection in the motor may have switched off due to overload; allow approximately 15 minutes for cooling. Second, check the foot switch. Finally, unscrew the e-box and check the contactor on the PC-board.
How to fix insufficient suction or blowing in Veit Brisay Ironing Centers?
If you're experiencing insufficient suction or blowing with your Veit Brisay Ironing Centers, it's likely due to a dirty cover. You should clean or replace the cover to resolve this issue.
Why is the fan motor running loudly in my Veit Brisay Varioline S Ironing Centers?
A loud fan motor in your Veit Brisay Ironing Centers is likely caused by a dirty and unbalanced impeller. Clean the impeller to fix this issue.
General| Brand | Veit Brisay |
|---|---|
| Model | Varioline S |
| Category | Ironing Centers |
| Language | English |
To Next Page