To Next PageTo Next PageWhy is there insufficient suction or blowing in my Veit UNISET S (400V version)?
If your Veit Indoor Furnishing unit has insufficient suction or blowing in the 400V version, the fan might be running in the wrong direction. To fix this, open the unit plug and change the phases L1 and L3.
What to do if my Veit UNISET S has no suction or blowing?
If your Veit Indoor Furnishing unit isn't providing any suction or blowing, a few things could be happening: 1. The thermal protection in the motor may have switched off due to overload. If so, allow approximately 15 minutes for it to cool down. 2. Check the foot switch. 3. Unscrew the e-box and check the contactor on the PC-board.
General| Brand | Veit |
|---|---|
| Model | UNISET S |
| Category | Indoor Furnishing |
| Language | English |
