To Next Page
K
Kimberly MccallAug 1, 2025
What to do if Velab VE-K Scales display O-load?
- SSuzanne ChangAug 1, 2025
If your Velab Scales display 'O-load', it indicates an overload. You should consider loss weight.
What to do if Velab VE-K Scales display O-load?
If your Velab Scales display 'O-load', it indicates an overload. You should consider loss weight.
What does O-zero mean on Velab Scales and how to fix it?
If your Velab Scales display 'O-zero', it means the initial zero has been exceeded. You can modify the settings or remove any objects from the pan.
What to do if Velab Scales display B-Err?
If your Velab Scales display 'B-Err', try recharging the battery.
What to do if my Velab VE-K Scales show O-load?
If the Velab Scales display 'O-load', it indicates that the load on the scale is exceeding its maximum capacity. Make sure that the weight of the item you are trying to measure is within the scale's specified limits.
How to fix LOWBAT light on Velab VE-K Scales?
If the 'LOWBAT' light is illuminated on your Velab Scales, it means the scale needs to be charged. Connect it to a power source to recharge the battery.
General| Calibration | External |
|---|---|
| Display | LCD |
| Auto Power Off | Yes |
| Overload Indication | Yes |
| Low Battery Indication | Yes |
| Platform Size | 160mm x 160mm / 200mm x 200mm / 250mm x 250mm / 300mm x 300mm |
| Units | g, kg, oz, lb |
| Power Supply | AC Adapter |
Essential safety guidelines for operating VELAB Co. products.
Recommended placement to ensure stability and reliability.
Key characteristics and design aspects of the scale.
Explains the function of each key on the operating panel.
Standard precautions before operating the scale.
Specific pre-operation checks for optimal performance.
Steps for setting up the scale unit and its contents.
Procedure for powering the scale on.
How to change the weighing units.
Guide to using the parts counting function.
Instructions for setting limit values.
Guide to accessing and configuring various scale settings.