To Next PageTo Next Page
Need help?Do you have a question about the velda 4i and is the answer not in the manual?
Indicates the head side of the bed frame using a small hole.
Demonstrates correct screw insertion at a 90-degree angle for proper assembly.
Provides a comprehensive list of all included components with part numbers.
Identifies bed head/foot sides and provides key frame dimensions (a and b).
Attaches the main transmission bars (K and L) to the bed frame.
Secures support brackets (C) to the bed frame using screws.
Attaches motor mounting plates (F) to the frame using screws (C, P).
Installs the motor and affixes the warranty label for validity.
Secures the motor housing and additional mounting brackets.
Details how to adjust bed height and properly tighten assembly bolts.
Installs the final support feet onto the bed frame.
Identifies the remote control, motors, synchro cable, and power supply.
Installs the foot stoppers to prevent items from sliding off the bed.
Pairs the remote and motor automatically upon initial power-up.
Pairs the remote and motor manually if automatic mode fails.
Enables synchronized control of two beds and saves preferred positions.
Resets the motor receiver to factory settings to resolve pairing issues.
Provides important usage warnings and links to further instructions.
General| Brand | velda |
|---|---|
| Model | 4i |
| Category | Indoor Furnishing |
| Language | English |
