92
93
Owner’s Manual
36V
BICYCLE’S ELECTRICAL MODES
5 ASSISTANCE LEVELS
Turn the motor on, press the assistance
level selector on the Digital Control Panel
and choose one of the 6 positions.
Assistance Level Selector on
Digital Control Panel
Position 0
When you pedal or use the throttle, the motor will not turn ON.
Position 1
When you pedal, the motor turns on and gives you approximately 10%
assistance. This means moving forward at low speed on a level road, for
example, will require slightly less effort.
Position 2
When you pedal, the motor starts and provides about 15% assistance.
This means less effort for you if you are travelling at low speed on a level
road with a slight headwind.
Position 3
As you pedal, the motor starts and gives about 40% assistance. This
means you will not have to exert yourself as much to go up a slight hill.
Position 4
Once you pedal, the motor starts and gives about 75% assistance.
This will help you go up a good-sized hill.
Position 5
As you pedal, the motor starts and provides about 100% power. This
means you will find it easier to go up steep hills or move forward against
strong headwinds.
MANUAL MODE WITHOUT
PEDAL-ASSISTANCE OR THROTTLE
To deactivate the motor, press the –/O button on the Control Panel; to
reactivate the motor, simply press the –/O button again.
Note that as soon as you use the brakes, the motor stops automatically
and the chosen functions are deactivated. To turn the electrical power OFF
entirely, simply press the -/O on the right side of the battery.
CRUISE CONTROL
To deactivate the Cruise Control, simply press the Speed Control button
again or press one of the brake levers.
Cruise Control
Turn the Throttle Handle until the desired
speed is attained, maintain this for a few
seconds then press the Cruise Control
button on the Control Panel. This activates
the Cruise Control, you can now release
the Throttle Handle and your speed will be
maintained.
To Next Page
Loading...
Need help?
General
