Velec D2S/48V User Manual

88
89
Single Mileage Reset
a. Press the MODE button and the ( - ) button together the single mileage is
Reset.
Switch from Single Mileage to Total Mileage
a. In the power-on state, press the MODE button to switch single /total
mileage.
Backlight
Brightness Setting
Interface
Cruise Control
Mode Setting
Interface
3. Backlight Brightness Setting
a. Press MODE to enter the
Backlight Brightness setting.
b. Press the ( + ) button to increase
the brightness and the ( - ) button
to decrease the brightness.
Setting range: 1-8.
adVanced settIngs
Cruise Control Mode
a. Press ( - ) button for 2 seconds
to enter the cruise mode
b. To deactivate, simply press one
brake lever
Note: When the wheel speed reaches or exceeds the set value, the motor’s output
power will continue to attenuate. The maximum speed is 32 km/h.
The LCD Panel has a special and integrated button, which consists of
three single buttons fixed on the left side of the LCD Panel.
1. Press the
MODE button for 2 seconds to startup
2. In the startup mode, press MODE button for another 2 seconds
to shut down
Note: If more than four hours without the use of your Velec, please take off the battery
from the Electric Bicycle and placed it in a dry storage.
MODE Button
General Setting
Interface
Speed Limit
Setting Interface
( + ) Bouton
( - ) Bouton
general settIngs
1. Km or Mile
a. Press the ( + ) button and the ( - )
button together for 2 seconds
b. Press ( + ) button or the ( - ) but-
ton to switch from km / mile
2. Speed Limit
a. Press MODE to enter the speed
limit setting
b. Press the ( + ) button to increase
the limit and the ( - ) button to
decrease the limit
Setting range: 15-50Km/h;
10-32Mile/h

Velec D2S/48V Specifications

General

Brand	Velec
Model	D2S/48V
Category	Bicycle
Language	English