Velec S Series User Manual

112
113
Owner’s Manual
The remaining battery capacity display interface
Fault code display
When the Electric bicycle electronic control system fails, the LCD Panel will
automatically display the fault code.
Note: Only the fault is solved, the instrument can exit from the fault code display. Turn
off the power supply before the fault is solved.
Fault
Code
Definition
04 Turn to no homing
05 Turn fault
06 Low voltage protection
07 Over voltage protection
08 Motor Hall signal line fault
09 Motor Phase line fault
10 Reach the high temperature protection point
11 Temperature sensor fault
12 Current sensor fault
21 Speed sensor fault
22 Battery communication fault
30 Instrument communication fault
<20% 20%-40% 40%-60% 60%-80% 80%-100%
Fault Code
Display Interface
Use Attention
Note that safe driving is necessary and avoiding collision of the instrument.

Velec S Series Specifications

General

Brand	Velec
Model	S Series
Category	Bicycle
Language	English