VELECO FASTER - Page 21

21
veleco
1
Drive mode change switch
2
Light switch
The switch allows changing the low beam to the high beam and vice versa.
Position means activates the headlights.
Position
means switching on the high beam. At the same time, the main
beam indicator lights up. Switching on the main beam is only possible when the low
beam is on!
When the drive mode change switch is set to F, by turning the grip scooter will move
forward.
When the drive mode change switch is in the R position, by turning the grip the sco-
oter will move backwards.
F
R
 
I
G
N
I
T
I
O
N
P
U
S
H
ON