22
After switching on the low beam, press the switch down
to activate the high
beam as long as the button is held down
Turn signal switch, hazard warning lights
The switch should be used when changing the
direction of movement.
• To turn on the left turn signal, move the switch
to the left.
• To turn on the right turn signal, move the swi-
tch to the right.
• Turn off the indicator by pushing the white
switch.
WARNING
Failure to use the turn signals
or not to turn them off after
the maneuver is complete can
be very dangerous. Other road
users may misjudge the driver’s
intentions, which may result in
an accident. When changing
lanes or turning, always use
turn signals. After completing
the maneuver, turn off the indi-
cator immediately.
F
R
I
G
N
I
T
I
O
N
P
U
S
H
ON
To Next Page
Loading...
