50
Inspection
3 months
9 months
12 months
18 months
21 months
Checking the operation of moving parts and ball bearings, lubrication and cle-
aring backlash
◆ ◆ ◆ ◆ ◆
Tire control (free rotation, leveling, axle work, tires condition, profile, rim con-
dition, pressure in case of inflated tires, axle clearance, etc.)
◆ ◆ ◆ ◆ ◆
Checking operation of other detachable components (example seat belt, bac-
krest)
◆ ◆ ◆ ◆ ◆
Checking operation of the drives (while driving trial – noises, speed, free ope-
ration, etc.) If necessary: checking the operation, first without load, then at
rated load (safe working load) to check engines for wear or damage through
comparison of the electric current with the values obtained when the vehicle
was delivered.
◆ ◆ ◆ ◆ ◆
Checking the operation of the front and rear suspension
◆ ◆ ◆
Checking the operation of audio signals
◆ ◆ ◆ ◆ ◆
Checking the engine mounting
◆ ◆ ◆ ◆ ◆
Checking the fastening elements (bolts, nuts, etc.)
◆ ◆ ◆ ◆ ◆
Checking the steering wheel, adjustment
◆ ◆ ◆ ◆ ◆
Checking of the lighting condition
◆ ◆ ◆ ◆ ◆