EasyManua.ls Logo

VelectriX Ascent+ 29 MTB - The Battery Charger; Battery Care

VelectriX Ascent+ 29 MTB
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 6
Battery Instructions
To turn the battery ON/OFF, you should remove the battery from the bike
and press the ON/OFF button underneath the battery case (Pic 1). You do
not have to turn the battery OFF after every ride, only when the bike is not
being used for long periods of time.
This bike is supplied with a set of keys, which are needed to lock/unlock the
battery from the bike. The lock is located at the top of the battery on the
left hand side of the bike. Simply turn left or right to lock/unlock. To remove
the battery, unlock the battery and slide the battery to the left hand side.
The battery cradle will remain in place on the bike. When reattaching the
battery make sure to lock the battery to avoid unnecessary power failures
or damage.
You can charge the battery on or off the bike. Plug the battery charger
(supplied with this bike) into the charging port, which is positioned at the
bottom of the battery cradle on the left side ( Pic 2). Once connected to the
battery the charger can then be turned on at the power socket. A GREEN
light will indicate when the battery is fully charged. Max charge time is 4
hours.
Pic 1 Pic 2

Related product manuals