EasyManua.ls Logo

Velivi KMYL100-2 - User Manual

Velivi KMYL100-2
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
MODEL: KMYL
100-2 / KMYL150-2
Suppo rt Email : Velivi@163.com
Support Phone: (213)432-5433

Questions and Answers

  • S
    Stephanie DuncanAug 13, 2025
    What to do if Velivi Refrigerator is not cold enough?
    • M
      Monique RodriguezAug 14, 2025
      If your Velivi Refrigerator isn't cold enough, several factors could be the cause. First, the external environment might require a colder setting; try setting a colder temperature and allow several hours for it to stabilize. If the refrigerator was recently disconnected, remember it takes 3-4 hours to cool down completely. Also, avoid prolonged or frequent door openings and ensure the door is closed properly. Finally, check the door gasket for a proper seal; clean or change it if necessary.
  • M
    matthewreedAug 16, 2025
    Why is my Velivi Refrigerator not running?
    • K
      Kevin GutierrezAug 17, 2025
      If your Velivi Refrigerator isn't running, there are a few potential reasons. First, ensure the refrigerator is properly plugged into the outlet. If it is, check to see if the refrigerator is turned on. If the refrigerator is on and plugged in, check your house fuse or circuit breaker, and replace the fuse or reset the breaker if needed.
  • R
    Reginald CrawfordAug 21, 2025
    Why does my Velivi KMYL100-2 compressor turn on and off frequently?
    • S
      Stephen ChangAug 21, 2025
      If the compressor in your Velivi Refrigerator is turning on and off frequently, it could be due to several reasons. The room temperature might be hotter than normal, which causes the refrigerator to work harder. A large amount of contents added to the cooler can also cause it to run more until the desired temperature is reached. Frequent door openings, incorrect temperature settings, an improperly closed door, or a faulty door gasket can also contribute to this issue. To resolve this, open the door less often, ensure the temperature is set correctly, close the door properly, and check/clean/change the door gasket if necessary.
  • T
    tara03Aug 25, 2025
    What causes moisture build up on Velivi KMYL100-2?
    • J
      James KellyAug 25, 2025
      Moisture build-up on the interior or exterior of your Velivi Refrigerator can occur due to high humidity or temperature. In high humidity, lower the room humidity. In high-temperature environments, move the refrigerator to a cooler place, avoiding heat and sunlight. Also, avoid frequent door openings and check the door gaskets for a proper seal.
  • R
    Robert TateAug 28, 2025
    Why is my Velivi Refrigerator door not closing properly?
    • C
      Cody AdamsAug 28, 2025
      If the door of your Velivi Refrigerator isn't closing properly, ensure the cooler is level. If the door was reversed, make sure it's re-installed correctly. Also, check if the gasket is dirty and clean it if necessary. Finally, ensure the shelves are placed properly.
  • R
    Ronald DavisSep 1, 2025
    What to do if Velivi Refrigerator light does not work?
    • K
      Kristina SextonSep 1, 2025
      If the light in your Velivi Refrigerator isn't working, first ensure the cooler is plugged in. Next, check the circuit breaker and fuses. Finally, make sure the light button is turned “ON”.
  • S
    Sharon KingSep 5, 2025
    Why is my Velivi KMYL100-2 Refrigerator making so much noise?
    • R
      Rebecca MurphySep 5, 2025
      If your Velivi Refrigerator seems to make too much noise, first ensure the cooler is level. The rattling noise may come from the normal flow of the refrigerant. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant. Also, contraction and expansion of the inside walls may cause popping and crackling noises, which are normal.
  • B
    Brian CookSep 8, 2025
    What causes vibrations in Velivi KMYL100-2?
    • J
      Jasmine GuerreroSep 8, 2025
      Vibrations in your Velivi Refrigerator can occur if the cooler is not leveled. Also, make sure the bottles don’t touch each other. Finally, check for and remove any object under the cooler.

Summary

IMPORTANT SAFETY INSTRUCTIONS

PRODUCT DIAGRAM

Control Panel

Identifies the main control interface and its functions for operating the appliance.

Beverage Shelves

Details the adjustable shelves within the cooler for storing beverages.

Exhaust Window

Shows the location of the ventilation exhaust for heat dissipation.

Leveling Legs

Illustrates the adjustable legs used to ensure the cooler is stable and level.

Top Hinge

Points out the hinge mechanism located at the top of the door.

Glass Door with Handle

Highlights the main door, its glass panel, and the attached handle.

Safety Child Lock

Indicates the presence and location of a child safety lock feature.

INSTALLATION INSTRUCTIONS

Before Using Your Beverage cooler

Steps to take before connecting the beverage cooler to power, including unpacking and initial cleaning.

To Install Stainless Steel Handle

Detailed instructions for attaching the stainless steel handle to the cooler door.

To Install Your Beverage cooler

Guidance on selecting a suitable location and ensuring proper placement for optimal performance.

OPERATION INSTRUCTIONS

Controls

Explanation of the appliance's control panel buttons and their functions for temperature and light.

Light Control

How to manage the interior lighting, including automatic shut-off and manual override.

Storage

Information regarding the capacity and how different bottle sizes may affect storage.

Door Lock

Instructions on how to use the provided lock and key to secure the cooler door.

Wired Shelves

Guidance on removing and using the appliance's internal wired shelves for organization.

CARE & MAINTENANCE

Cleaning Your Beverage cooler

Procedures and recommendations for cleaning the interior and exterior of the beverage cooler.

Power failure

Advice on what to do if the appliance loses power for an extended period.

Vacation Time

Instructions for operating or preparing the cooler when leaving for vacation.

Moving Your Beverage cooler

Steps to safely move the beverage cooler, including securing contents and protecting the unit.

Energy saving tips

Recommendations for optimizing energy efficiency and reducing electricity consumption.

TROUBLESHOOTING GUIDE

Warranty Terms

Warranty Period

Details the duration and conditions for customer warranty entitlements.

Warranty Exclusions

Lists conditions and actions that will void the product's warranty coverage.

Warranty Claim Procedure

Outlines the steps customers should follow to initiate and manage a warranty claim.

Contact Card

Provides essential contact information for customer support and service inquiries.

Velivi KMYL100-2 Specifications

General IconGeneral
BrandVelivi
ModelKMYL100-2
CategoryRefrigerator
LanguageEnglish

Related product manuals