To Next PageTo Next Page
Need help?Do you have a question about the Velleman LABPS3005DN and is the answer not in the manual?
General| Output Voltage | 0 - 30 V |
|---|---|
| Output Current | 0 - 5 A |
| Power Rating | 150 W |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Frequency | 50/60 Hz |
| Cooling | Fan |
| Ripple Voltage | < 1 mVrms |
| Input Voltage | 230 V |
| Display | LED |
| Protection | Short Circuit |
| Ripple Current | < 1 mA |
Important environmental information about the product disposal and recycling.
Identification and description of the device's numbered components.
Procedure for powering the device on and off.
Setting up and using the constant voltage output.
Setting up and using the constant current output.
Procedure for adjusting and fine-tuning voltage and current values.
Recalling previously saved voltage and current settings.
Saving desired voltage and current settings to memory slot M3.
Instructions for connecting the load to the device terminals.
Procedure for applying voltage and current to the connected load.
Setting up and using the over-current protection feature.
Instructions for installing and using the PC control software.
Details of the main software interface, including output display and settings.
Configuration options for programming output sequences, duration, and repetitions.
General guidelines for cleaning the device and handling maintenance.
