Need help?Do you have a question about the Velocitek SC-1 and is the answer not in the manual?
General| Brand | Velocitek |
|---|---|
| Model | SC-1 |
| Category | Boating Equipment |
| Language | English |
Overview of the SC-1's capabilities and functionalities for sail training, including speed, compass, VMG, and timer features.
Explains the structure of the manual into two main sections: On The Water and When You Get Home.
Details the main display areas and indicators of the SC-1 device, including upper and lower displays and mode indicators.
Describes the four capacitive touch sensors used for controlling the SC-1 unit: Mode, Plus, Minus, and Up buttons.
Instructions on how to open the waterproof case and insert three AA batteries correctly into the SC-1.
Details the Speed Lock and Timeout Lock features designed to prevent inadvertent control by splashing water.
Step-by-step guide on how to unlock the SC-1 device's buttons using a sequence of thumb movements.
Procedure for turning the SC-1 device on using its touch sensors, involving covering the Mode and Minus buttons.
Procedure for turning the SC-1 device off, which involves covering the Mode and Minus buttons.
Explains the process of acquiring GPS signals for the SC-1 to function, requiring a clear view of the sky.
Instructions on how to select and change modes displayed on the lower and upper SC-1 screens.
Details the Speedometer Mode, showing current speed and how to recall maximum and best 10-second average speeds.
Explains the Compass Mode, displaying true or magnetic heading and referencing magnetic declination.
Details the Tactical Compass Mode for identifying wind shifts relative to the defined wind direction.
Details required software installation, including Control Center, device drivers, and necessary frameworks like .NET and Java.
Procedure for connecting the SC-1 to a PC and downloading recorded GPS data using the Control Center software.
Describes how to save downloaded GPS data in different formats like .gpx, .kml, and Velocitek's proprietary .vcc.
How to store personal and boat information on the SC-1 device, which is displayed in Control Center and attached to .vcc files.
Guide to customizing SC-1 settings like logging rate, speed display units, and enabling lock features.
Steps to update the SC-1 device's firmware with new versions released by Velocitek to improve performance or add functionality.
To Next Page
