To Next PageTo Next Page
Need help?Do you have a question about the Velocity 240IR and is the answer not in the manual?
Tap water minerals can clog and damage the iron, reducing steam. Use distilled or low lime water.
Empty the reservoir after ironing to prevent stagnant water and lime deposits, keeping the iron calcium-free.
The iron's water reservoir should be filled when the iron is cool and before it is plugged in.
Do not use solvents, acids, or abrasive products. Never submerge the appliance in water.
Use a 15-amp extension cord (max 10', 14-gauge wire) to prevent overheating and voiding warranty.
Call toll-free or email for service and/or technical assistance on the product.
Click open the filling spout and fill the 240IR using the included filling funnel.
Select AUTO for all fabrics or TURBO for tougher fabrics with maximum steam.
Touch the sensor handle to engage steam. The steam light should illuminate.
Use horizontal ironing with back-and-forth motion and vertical steaming 15-30cm away.
The iron auto-shuts off after 8 minutes upright or 30 seconds flat. Beeps and flashes red.
Press steam on/off for 5 seconds to bypass auto shut off. LEDs flash to confirm.
Check steam button, heat-up time, and water level. Ensure unit requires more water if empty.
Ensure correct fabric/temperature setting is selected. Press function button for higher setting.
The Velocity 240IR is a steam iron designed for efficient and versatile garment care, offering a range of features for both horizontal and vertical ironing, as well as user-friendly maintenance.
The primary function of the Velocity 240IR is to provide powerful steam and heat for ironing various fabrics. It features a sensor handle that, when touched, engages the steam function, making it intuitive to use. The iron offers different temperature and steam settings to accommodate a wide array of materials, from delicate synthetics to robust cotton and linen. Users can select between an "AUTO" setting for general use, which is safe for all fabrics, or a "TURBO" setting for maximum steam and heat, ideal for tougher fabrics like denim. The iron is equipped with an auto-off (stand by) mode for safety and energy conservation, activating after 8 minutes in an upright position or 30 seconds if left flat without user interaction. This feature includes an audible beep and flashing red LEDs to indicate its activation. For users who require longer periods of continuous operation, the Velocity 240IR also includes an auto shut-off bypass feature, which can be activated by pressing the steam on/off button for 5 seconds while the hand is off the sensor handle. This bypass allows the iron to stay on indefinitely until unplugged, at which point it reverts to its default auto shut-off setting.
To begin using the Velocity 240IR, the user first opens the filling spout and fills the water tank with distilled or lime-free water using the included funnel. After closing the spout, the iron is plugged in. The desired temperature setting is then selected using the control panel buttons. The "AUTO" button provides a convenient setting suitable for all fabrics, while the "TURBO" button is for tougher fabrics requiring maximum steam. Once a setting is chosen, the button light will flash red, indicating that the iron is heating up. A beep and a green light signal that the correct temperature has been reached.
For horizontal ironing, the user simply touches the sensor handle to engage the steam, and the steam light will illuminate red. The iron is then moved back and forth over the fabric. It is important not to hold the iron in one place for too long to prevent damage to the fabric. For vertical steaming, the iron should be held in an upright position, approximately 15-30cm away from the fabric, allowing the steam to relax wrinkles.
The control panel includes a "Steam Button" to push and turn steam on/off, an "Auto Button" for safe use on all fabrics, and a "Turbo Button" for maximum steam and heat. The iron's soleplate is designed for smooth gliding over garments.
Proper maintenance is crucial for extending the life and performance of the Velocity 240IR. After each use, it is recommended to unplug the appliance, allow it to cool, and drain any remaining water from the tank. This prevents lime deposits from forming due to stagnant water evaporation, which can clog and damage the iron. Storing the steam iron without water helps prevent calcium build-up.
For optimal performance, the use of distilled or lime-free water is strongly advised. Tap water, even if filtered, contains minerals that can lead to clogging, corrosion, and damage over time, significantly reducing steam output. The water reservoir should always be filled when the iron is cool and before it is plugged in.
Cleaning the appliance should be done without solvents, or products with an acid or base pH, such as bleach or abrasive products. The iron should never be submerged in water or any other liquid, nor placed under running water.
Regarding power, if an extension cord is absolutely necessary, a 15-amp cord should be used. Cords with lower amperage ratings may overheat. It is recommended to use no more than a 10-foot extension cord and 14-gauge wire, and to arrange the cord carefully to avoid pulling or tripping hazards. Using lower-rated cords may void the warranty.
If troubleshooting issues arise, such as the iron not producing steam or the soleplate not heating well, users are advised to check the water tank level, ensure the steam button is engaged, and verify that the correct fabric/temperature setting has been selected. For further assistance, Reliable Corporation provides customer support via a toll-free number and email.
General| Model | Velocity 240IR |
|---|---|
| Category | Iron |
| Spray Function | Yes |
| Self-Cleaning | Yes |
| Auto Shut-off | Yes |
| Vertical Steam | Yes |
