How to troubleshoot a Velodyne SC-1250 Amplifier that is not powering on?
If your Velodyne Subwoofer isn't powering on, first, ensure the unit is properly plugged into an active power outlet. Also, verify that the power switch is in the 'on' position.
What to do if Velodyne Subwoofer remote is unresponsive?
If the remote for your Velodyne Subwoofer is not responding, it's recommended to replace the batteries in the remote.
Why is my Velodyne SC-1250 Amplifier overheating?
If your Velodyne Subwoofer has been running at high levels, it may have overheated, potentially engaging one of the protection circuits.
General| Amplifier Power (RMS) | 1250 Watts |
|---|---|
| Phase Control | 0° or 180° |
| Low Pass Filter | 40 Hz - 120 Hz, 12 dB/octave |
| Subsonic Filter | 15 Hz |
| Inputs | Line-level, speaker-level |
Guides the user through the installation process of the SC-1250 amplifier.
Explains RCA and XLR line-level inputs for connecting audio sources.
Explains how to configure the amplifier for different subwoofer models.
Lists specific commands for controlling the amplifier via RS-232.
To Next Page
