To Next PageTo Next Page
Need help?Do you have a question about the Velux KLC 500 and is the answer not in the manual?
General| Output Voltage | 24V DC |
|---|---|
| Protection Class | IP20 |
| Storage Temperature | -20°C to +60°C |
| Frequency | 50 Hz |
| Operating Temperature | +40°C |
Read instructions, keep for reference, keep away from children, ensure safe operation before use.
Reduce risk of severe injury or death. Do not let children play with unit. Ensure safe operation.
Designed for VELUX products. Low voltage output. RF unit. Proper disposal of electronics.
Minimal maintenance required. Clean with damp cloth. Spare parts available from VELUX.
Fix control unit to wall. Recommended to place in room where products are installed. Indoor use only.
Route 2-core wire from control unit to junction box, then to products. Place junction box near products.
Products must be registered in activation control. Switch on power. Registration within 10 minutes.
Register specific products via additional control (e.g., KLI 110 b). Disconnect unused product cables.
Register all products via additional control (e.g., KLI 110 b). Complete registration as instructed.
Controls up to five products of the same type. Operates one at a time in random order.
Reset by removing cover and pressing test button for at least 5 seconds. Enables registration.
