To Next PageTo Next Page
Need help?Do you have a question about the Vemm Tec PTZ-BOX 3.0 and is the answer not in the manual?
General| Model | PTZ-BOX 3.0 |
|---|---|
| Category | Media Converter |
| Power | 12V DC |
| Operating Temperature | 0°C to 40°C |
| Video Input | HDMI |
| Video Output | HDMI |
| Audio Input | HDMI |
| Audio Output | HDMI |
| Control Interface | RS232 |
| Output Interface | HDMI |
| Input Interface | HDMI |
Covers the main supply battery and backup battery, including their life cycles.
Details the safety requirements for operating the device in explosive atmospheres.
Describes the temperature measurement method, range, and sensor details.
Details the pressure measurement method, sensor, and measuring range.
Explains the methods and validity ranges for compressibility factor calculation.
Covers the counters used for volume measurement and error conditions.
Explains the serial communication interfaces for connecting to superior systems.
Explains how to configure the device using the GASCcomm service SW or keypad.
Describes the 10-button keypad and its functions for device operation.
Explains how to modify device parameters directly using the keypad.
Provides guidance on physically installing the device on walls or pipelines.
Recommends checks for correct device function after installation.
Explains how to connect the device to a PC via serial, infrared, or modem.
Guides on configuring the device using the GASCcomm software.
Details the use of the configuration assistant for simplified setup.
