VENCO Ubiquiti NanoStation Loco M2 User Manual

P2P Wireless Bridge User Guide
Overview:
Thank you for purchasing a Point-to-Point (P2P) Wireless Bridge from Venco Business Solutions.
The P2P Wireless Bridge allows you to wirelessly transmit an existing Internet connection (DSL,
cable modem, etc) to your ATM or Jukebox. Simply plug in the included Transmitter to the
Internet connec-tion, and the included Receiver to your ATM or Jukebox and wirelessly transmit
the signal up to 300 feet though walls, floors, etc.
All components come pre-configured from our factory, and require no changes in configuration for
any of your existing Internet connectivity. The P2P Wireless Bridge is ready to use right out of the
box, making it a true plug-and-play solution!
This guide will help you install and deploy your new P2P Wireless Bridge. Should you have ques-
tions, please call our technical support line at (800) 762-9962, or visit us online at
www.vencosolutions.com.
** Note, the P2P Wireless Bridge is compatible with TCP/IP capable ATMs.

VENCO Ubiquiti NanoStation Loco M2 Specifications

General

Brand	VENCO
Model	Ubiquiti NanoStation Loco M2
Category	Wireless Access Point
Language	English

Summary

Overview

Package Contents

Setup Instructions

Connect Transmitter

Connect the Transmitter to your existing Internet connection, including power and LAN ports.

Connect Receiver

Connect the Receiver to the ATM, including power and LAN ports.

Final Placement and Configuration

Position the Receiver and configure the ATM for TCP/IP processing.

P2P Wireless Bridge System Diagram

Troubleshooting

Networked Device Connectivity Issues

Troubleshoot connectivity problems with the ATM or kiosk, including power resets and checking connections.

Weak Signal Issues

Address weak signal strength by improving line-of-sight between the Transmitter and Receiver.

No Lights Illuminated

Resolve issues where no lights are illuminated on the Transmitter or Receiver by checking setup and power.

Mounting and Aiming