Need help?Do you have a question about the VENGE VIAS and is the answer not in the manual?
Details required tools and torque settings for various bolts used in bicycle assembly.
Information on the Specialized bicycle warranty policy and where to access it for support.
Steps to determine the correct frame fit by measuring and adjusting components.
Instructions for adjusting saddle height and seatpost for ergonomic rider positioning.
Detailed instructions on how to safely cut the fork's steerer tube to the correct length.
Procedure for routing the front brake housing and installing the expander plug securely.
Instructions on how to safely remove the expander plug from the fork steerer tube if needed.
Guide for routing electronic brake and shifter cable housings within the bicycle frame.
Guide for routing mechanical brake and shifter cable housings within the bicycle frame.
Steps to prepare the electronic shifting handlebar faceplate, including mount options.
Routing electronic shift wires and hydraulic brake housings for the handlebar assembly.
Steps to prepare the mechanical shifting handlebar faceplate for component integration.
Routing mechanical shift and hydraulic brake housings for the handlebar assembly.
Guide for routing brake housings in the non-ViAS setup, connecting to frame entry ports.
Procedures for setting up mechanical shifting components on the non-ViAS frame.
Procedures for setting up electronic shifting components on the non-ViAS frame.
To Next Page
General