INSTRUCTIONS FOR INSTALLATION
This appliance must be installed by a competent person in accordance with the current version of
the following Regulations and Safety Standards or your local Regulations and Safety Standards.
Venini Installation Instructions
In Australia the installation must comply with AS/NZS3000 wiring rules.
POSITIONING THE APPLIANCE
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending
on size) or 600mm worktop, providing the minimum distance is allowed.
- 650mm between the top surface and the underside of any horizontal surface above it.
- 50mm clearance around the appliance and any combustible materials
The surface of any adjacent unit must be capable of withstanding a minimum temperature rise of
85ºC.
PRE-COMMISSING THE APPLIANCE
When unpacked, check that the following parts are included with the appliance
• Venini Instructions and Installation booklet
• Adhesive sealing agent and fixing clamps & screws
8
To Next Page
Loading...