Need help?Do you have a question about the VENOM GPV-1 RTR and is the answer not in the manual?
Lists essential tools required for assembling the RC motorcycle.
Lists necessary batteries and optional servo chart for the RC motorcycle.
First steps of assembly, focusing on bag A&H components.
Connecting frame parts and installing the swing arm assembly.
Detailed instructions for assembling the front and rear shock absorbers.
Guidance on gluing tires to wheels and attaching the axles.
Attaching the main body, rider figure, and body clips for final assembly.
Adjusting rake angle and wheel base for track conditions and handling.
Fine-tuning rear shock position, steering, and suspension droop.
Understanding gear ratios and estimating speed based on motor and battery.
Adjusting ride height and using weighted wheel sets for performance.
Comprehensive lists of standard kit and optional upgrade parts.
A dedicated sheet for recording and tracking RC motorcycle setup parameters.
Contact details and procedures for warranty claims and product repairs.
Important disclaimers and warnings regarding product usage and liability.
To Next Page
General