To Next PageTo Next Page
Need help?Do you have a question about the Vent-Axia Lo-Carbon Response 7 and is the answer not in the manual?
Covers wiring regulations, installation zones, isolator switches, mains supply compliance, product usage, and environmental conditions.
Provides guidelines for positioning the transformer away from water, heat, and grease for SELV models.
Outlines the process for cutting holes, mounting the fan, and attaching ducting for interior wall or ceiling installations.
Details cutting holes, inserting sleeves, fixing grilles, and mounting the fan for exterior wall installations.
Directs users to refer to kit instructions for window mounting procedures.
Emphasizes isolation, specifies cord size, SELV supply compatibility, and states the fan is double insulated and not to be earthed.
Explains how to access the fan's configuration menu by removing the grille and using control buttons.
Details settings like display rotation, trickle/boost speeds, boost time, humidity trigger, fan control mode, comfort mode, and lock code.
Details RH Ambient Response and RH Rapid Response settings for enhanced humidity control.
Covers regular inspection, cleaning of inlets and front face, and notes sealed bearings require no lubrication.
General| Type | Axial |
|---|---|
| Voltage | 230 V |
| IP rating | IPX4 |
| Frequency | 50 Hz |
| Application | Residential |
| Control | Timer |
