10
NEXT: Planting Your Garden
Before your planting, Please press the “ ” button for 5 sec.
“ ” Setting is a quick setup for starting your new garden. The LED timer pump will be reset once you press it for
5 sec.
1. Watering
- Add water through the feeding window until the water level reaches "Fill to Here".
- It’s ok to add water at any time. Keeping the water filled to “Fill to Here” will promote good growth.
- It's better to use tap water or distilled water then well water.
- Your pump cycle is set to be ON for 14 hours and OFF for 10 hours.
2. Add Nutrients
- Add nutrients every 2 weeks (5ml A+5ml B Plant Food).
- Don't over feed. Too much plant food can harm your plants. Use the recommended amount of plant food.
- Add plant food into the bowl through the feeding window when you first start your planting.
3. Growing Lights
- BRIMMEL Hydroponic System has a built-in lighting timer. Once you set it up, it will automatically turn on or off
every day.
- ON for 14 hours and OFF for 10 hours every day.
- Touch the button to temporarily turn on the light (it will not affect the lighting timer)
- If you want to change the time of day when your lights turn on, touch and hold you finger on the " ” button for
5 sec. Your grow lights will turn on at this time every day.
SPECIFICATIONS
To Next Page
Loading...