Need help?Do you have a question about the VENTILAIRSEC VMI PUREVENT and is the answer not in the manual?
Explains symbols used in the manual for warnings and information, and provides general advice for optimal performance.
Important safety guidelines for installation, use, and maintenance of the appliance.
Guidelines on how the appliance can be used by different age groups and under various conditions.
Procedures and precautions for carrying out servicing and maintenance operations on the unit.
States that the appliance must not be modified and provides instructions for responsible disposal.
Visual identification of the main components of the VMI® PUREVENT unit.
Key technical specifications including casing, connections, usage area, and electrical data.
Table detailing power consumption at different airflow rates and pressures.
Physical dimensions of the PUREVENT model, HYDRO'R option, and control unit.
Instructions for installing the PUREVENT housing, including mounting options.
Guidance for installing the PUREVENT housing with the HYDRO'R option.
Steps and recommendations for connecting air ducts to the unit.
Details on compatible pipe system types and recommended air inlet types.
Requirements for ventilation openings in distributed and centralized installation types.
Methods for removing stale air, including considerations for single and centralized units.
Instructions for electrical connection, emphasizing professional installation and safety.
Steps to prepare for hydraulic connection, including component recommendations.
Procedure for connecting the thermostatic valve power cable to the electronic card.
Guidelines for connecting the Hydro'R system to the central heating system.
Specifies the required pressure level for the Hydro'R system's tapping points.
Block diagrams and rules for recommended installation configurations.
Best practices for installing hydraulic hoses to avoid pressure drops.
Instructions for connecting the Hydro'R module to a waste water network and priming the siphon.
Guidance on installing humidity or indoor air quality sensors.
Sensor installation locations, preferred areas, and restrictions to avoid.
Checklist of visual inspections required before switching the unit on.
Instructions for commissioning the unit using the VMI® LINK PRO app.
Prerequisites and information required before using the VMI® LINK PRO app.
Step-by-step guide for using the VMI® LINK PRO app to configure the unit.
Procedure for replacing the pollen, fine particle, or odour filters.
Reference to the user manual for replacing control unit batteries.
Guidance on checking the water level in the siphon for HYDRO'R units.
How to download maintenance data using the VMI® LINK PRO app via Bluetooth.
Instructions for cleaning the machine's motor and resistor components.
Important points to check to ensure the appliance remains effective and clear.
A table listing common faults, their causes, and remedies.
Table of error codes displayed on the control unit and their meanings.
Explains the meaning of different LED colours and corresponding remedies.
Reference to general terms and conditions of sale for warranty details.
Details the warranty periods for the system, control unit, and other components.
Conditions under which the warranty may be voided.
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Airflow | Up to 300 m³/h |
| Filtration | F7 filter (pollen, dust, mites) |
| Mounting | Wall-mounted |
| Control | Remote control |
| Noise Level | 30 dB(A) |
To Next Page
