Need help?Do you have a question about the VentMed BIPAP ST30 and is the answer not in the manual?
Describes conditions the device is intended for treatment of sleep apnea.
Lists potential side effects that may arise during therapy with the device.
Lists pre-existing conditions where positive airway pressure therapy may be unsuitable.
Details the procedure for connecting the device components and preparing it for use.
Describes the steps to start the therapy session using the device.
Explains the procedure to safely stop the therapy session.
Lists available therapy modes for different device models.
Details how to configure APCV mode parameters like IPAP, EPAP, and Trigger.
Provides solutions for frequently encountered issues with the device.
Lists critical safety warnings for operating the device to prevent harm.
Details cautions related to device usage, placement, and cleaning procedures.
Provides guidance on electromagnetic immunity tests and compliance levels.
Details compliance for RF emissions, harmonic emissions, and voltage fluctuations.
Details compliance for electrostatic discharge and transient immunity tests.
Details compliance for surge and voltage variation immunity tests.
Details compliance for magnetic field and RF immunity tests.
Provides guidance on RF field strengths from transmitters and recommended distances.
General| Brand | VentMed |
|---|---|
| Model | BIPAP ST30 |
| Type | BIPAP |
| Data Storage | SD Card |
| Voltage | 100-240V AC, 50/60Hz |
| Operating Mode | S, T, ST |
| IPAP | 4 to 30 cm H2O |
| EPAP | 4 to 25 cm H2O |
| Ramp Time | 0-60 min |
| Inspiratory Time | 0.5-3 s |
| Alarms | High pressure, Low pressure |
| Display | LCD Screen |
| Power Supply | AC Adapter |
| Humidifier Compatibility | Integrated |
To Next Page
