Vento V Series - Lcd Display

1. LCD DISPLAY
Display working status and DSP
control interface.
2. DSP KNOB
The knob for DSP presets.
3. RETURN BUTTON
Go back on the LCD display.
4. GAIN KNOB1
Adjust input gain.
5. GAIN KNOB2
Adjust input gain.
6. SIGNAL INPUT1
Connect LINE signal.
7. SIGNAL INPUT2
Connect LINE signal.
8. SIGNAL OUTPUT
Signal output connect another
speaker signal input.
9. POWER SWITCH
Power on-o .
10. MAINS INPUT
Power input.
11.CLIP LED
Input signal is reaching clip.
12.LIMIT LED
Amplirier is reaching clip.
1. LCD DISPLAY
Display working status and DSP
control interface.
2. DSP KNOB
The knob for DSP presets.
3. RETURN BUTTON
Go back on the LCD display.
4. GAIN KNOB1
Adjust input gain.
5. GAIN KNOB2
Adjust input gain.
6. SIGNAL INPUT1
Connect LINE signal.
7. SIGNAL INPUT2
Connect LINE signal.
8. SIGNAL OUTPUT
Signal output connect another
speaker signal input.
9. POWER SWITCH
Power on-o .
10. MAINS INPUT
Power input.
11.CLIP LED
Input signal is reaching clip.
12.LIMIT LED
Amplirier is reaching clip.
V12x/15x FUNCTION INSTRUCTION
8
V12x V15x