Need help?Do you have a question about the Ventrac MR740 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Fuel Type | Gasoline |
| Drive Type | 4WD |
| Drive System | All-wheel drive |
| Turning Radius | Zero-turn |
Describes the MR740 reel mower's cutting width and variable speed hydraulics.
Explains the manual's importance for safe operation and how to use its sections.
Defines hazard symbols, signal words, and technical terms used in the manual.
Details essential safety labels on the mower and their meanings.
Covers operator training, PPE, safe operating practices, and accident prevention.
Addresses safe operation on slopes, roadways, transport, and handling fuel/hydraulics.
Adjusts reel rotation speed and clipping discharge.
Manages lift arm position and secures them for transport.
Controls hydraulic motors and lift arm systems for operation/maintenance.
Routine daily inspections and connecting the mower to the power unit.
Guides for operating the mower and safe transport.
Covers adjusting cutting height, reel speed, blade contact, and offset.
Procedures for back lapping, grinding, and drive belt maintenance.
Guidance on checking oil level, changing oil, and replacing the filter.
Preparing for storage, lubrication points, and the maintenance schedule.
Provides physical measurements and fluid capacities of the reel mower.
Highlights the reel mower's construction and operational characteristics.
Illustrated parts for frames, hitch, lift arms, and mounts.
Illustrated parts lists for hydraulic drive, motors, and hoses.
Illustrated parts for reel heads, carrier frames, and rollers.
Details Ventrac's warranty coverage, limitations, and transferability.
To Next Page
