Why does the breaker/fuse keep blowing on my Venue Lighting Effects Flood Light?
A breaker or fuse might blow due to an excessive load on the electrical circuit. Check the total load placed on the circuit. Alternatively, there could be a short circuit along the power wires, so inspect the electrical wiring, both internal and external, for any shorts.
What to do if Venue Lighting Effects Flood Light device does not power up?
If your device isn't powering up, first, ensure that the mains have power. Then, check the power cord to make sure it is securely connected.
What to do if Venue Lighting Effects Flood Light is not responding to DMX?
If your flood light isn't responding to DMX, there are several things to check: * Verify the Control Display and unit addressing for correct DMX addressing. * Inspect the DMX cables for any damage. * Ensure the polarity switch settings on the controller are correct. * Check all cable connections to make sure they are secure. If these steps don't resolve the issue, the DMX input or the Main PCB may be faulty and need replacement.
General| Brand | Venue Lighting Effects |
|---|---|
| Model | revolver laser |
| Category | Flood Light |
| Language | English |
Lists all the components included with the Venue Revolver Laser fixture.
Guides users on how to carefully unpack the fixture and check for damage.
Explains the special formatting and symbols used throughout the manual.
Details the meaning of icons used to highlight important information.
Provides critical warnings and precautions regarding laser radiation exposure.
Outlines compliance with FCC rules and potential interference guidelines.
Highlights the key operational features of the Venue Revolver Laser.
Lists extra features like mounting hardware for the fixture.
Describes the physical control panel with buttons and display.
Details power requirements and connection guidelines for the fixture.
Identifies and explains the connectors and ports on the fixture's back panel.
Explains how to orient and mount the fixture, especially for hanging.
Provides instructions and safety considerations for physically rigging the fixture.
Describes how to connect fixtures for DMX or master/slave operation.
Explains the function of each button on the fixture's control panel.
Details the menu structure and options available on the control display.
Guides on how to precisely adjust the pan and tilt movements of the fixture.
Details how to select and control preprogrammed automatic chases.
Explains how to enable and configure sound-activated responses.
Describes how to adjust the microphone sensitivity for sound-active mode.
Guides on setting custom colors and manually controlling parameters.
Explains how to select between 11, 13, and 17-channel DMX modes.
Details how to set the initial DMX address for fixture control.
Explains how to set up fixtures for master/slave synchronization.
Details the function assigned to each channel in DMX modes.
Provides fundamental information and concepts about DMX control.
Offers solutions for common issues encountered with the fixture.
Explains how to connect multiple fixtures together for DMX operation.
Details the required specifications for DMX data cables.
Describes the XLR connectors used for DMX signal transmission.
Shows how to convert between 3-pin and 5-pin DMX connectors.
Illustrates the process of connecting fixtures in a DMX serial chain.
Provides guidelines for cleaning and maintaining the fixture's performance.
Lists the physical size and weight of the Venue Revolver Laser.
Details voltage, power consumption, and fuse rating.
Provides information on the laser and moonflower LED specifications.
Specifies the maximum ambient operating temperature and cooling method.
Describes the pan and tilt movement ranges and speed.
To Next Page
