Adjusting of heat up period: The temperature in the
beginning of a session is determined by the time of heat up
period, power level adjustment doesn’t have any effect on
heat up temperature. It can be changed easily. Have a
stopwatch ready to measure the time elapsed. Activate the
adjustment mode by holding boost, lift up the finger and swipe
downwards 4 times. All 3 lights will be active. Start the
stopwatch same time, and once the correct time has passed
just hold the boost button, and the vaporizer will save the new
time.
Battery level: When you insert the batteries, the 3 leds will
show the battery level according to the table below.
Caution: The herb chamber is made of stainless steel
and it is very hot during and after a session. Be careful!
For more information, tips, and troubleshooting please visit
www.venusvaporizers.com/blogs/extended-manual/apollo
Wishing You pleasant vapors!
www.venusvaporizers.com
To Previous Page
Loading...