20
FIRST USE
TURN ON THE KIT
Slide the ON / OFF button to turn the kit on / off.
CHOICE OF LANGUAGE
Always perform before the kit is not connected to
your phone. Press the voice button for at least 5
seconds to select the language, then release and
press again until the language is selected. Once
selected wait 3 seconds before turning off the kit.
FIRST CONNECTION
To connect your phone, please follow the steps
below:
1. Turn on the kit
2. The kit flashes red and blue, the voice will say
"Power on, Pairing" when the kit lights up.
3. Activate Bluetooth on your phone and search for
the S-62 Bluetooth device. If your phone asks for a
code, enter: 0000.
4. The kit will announce then “connected” and the
light will blink blue.
NOTE: Once the first connection is made, your
phone will be stored in the kit and the connection will
be done automatically.
To Next Page
Loading...