Verity Medical NeuroTrac IFC Rehab User Manual

OPERATION MANUAL
IFC Stimulator / Dual channel TENS&NMS Stimulator
Three product in one!
NeuroTrac IFC Rehab
TM
ENG

Verity Medical NeuroTrac IFC Rehab Specifications

General

Category	Medical Equipment
Waveform	Interferential
Frequency Range	1-150 Hz
Display	LCD screen
Portability	Portable
Type	Interferential Current Therapy Device
Application	Pain relief, muscle stimulation, rehabilitation
Power Source	Battery powered
Safety Features	Auto-shutoff

Summary

Contraindications, Precautions, and Warnings

Contraindications for Use

Specifies conditions and situations where the device must not be used.

Safety Warnings

Highlights critical safety advice and potential hazards associated with the device.

Usage Precautions

Outlines general safety measures and considerations for device operation.

Potential Adverse Reactions

Lists possible negative side effects that may occur from device use.

Introduction to the NeuroTrac IFC Rehab

Understanding Pain

Explains the biological function and perception of pain in the body.

TENS Explained

Describes Transcutaneous Electrical Nerve Stimulation and its application.

NMS Explained

Details Neuromuscular Electrical Stimulation and its therapeutic uses.

IFC Explained

Explains Interferential Stimulation using frequency interference for deeper penetration.

Device Display Overview

Screen Layout and Indicators

Details the various elements displayed on the device screen and their meanings.

Device Control Operations

Power and IFC Program Selection

Covers the ON/OFF switch and the button to select IFC programs.

IFC Control and Intensity Adjustments

Explains the SET/ESC button and intensity adjustment for IFC channels.

TENS/NMS Control and Intensity

Details TENS/NMS SET/ESC, intensity adjustment, and program selection buttons.

Timer and Lock Function Controls

Describes buttons for adjusting treatment time and activating lock modes.

Operating the NeuroTrac IFC Rehab

Getting Started Guide

Initial setup steps including battery insertion and electrode connection.

Setting Up IFC Custom Programs

Instructions for configuring custom IFC programs (PC1 and PC2).

Setting Up TENS/NMS Custom Programs

Guide to creating custom TENS (PC1) and NMS (PC2, PC3) programs.

IFC Program Table and Modes

Lists predefined IFC programs and describes available modes like ABT, SWP.

TENS/NMS Program Tables and Modes

Details predefined TENS/NMS programs and their operational modes.

Lock Mode Functionality

Explains how to lock and unlock the device for patient compliance monitoring.

Skin Electrodes and Placement

Electrode Placement Guidelines

Importance of electrode positioning for effective TENS and IFC therapy.

Available Electrode Types

Lists different shapes, codes, and sizes of self-adhesive electrodes.

Care and Maintenance

Unit and Battery Care

Instructions for cleaning the device and maintaining batteries.

Lead Wire Maintenance

Guidelines for handling and storing lead wires to prevent damage.

Electromagnetic Compatibility (EMC)

Electromagnetic Emission Information

Details RF emissions and compliance standards for the device.

Electromagnetic Immunity Information

Guidance on immunity to interference and environmental considerations.

Technical Specifications

General Device Specifications

Covers channels, isolation, waveform, energy source, and size.

IFC Stimulation Parameters

Technical details for Interferential Stimulation (carrier frequency, amplitude).

TENS and NMS Parameters

Specifications for TENS (amplitude, pulse width) and NMS (frequency, ramp up).

Troubleshooting Guide

Common Problems and Solutions

A table listing common issues, causes, and remedies for device operation.

Warranty and Customer Service

Product Warranty Information

Details the 2-year warranty period and terms for the device.

Customer Service Contact Details

Provides contact information for inquiries and support.