4
Your phone already has a SIM card preinstalled.
Step 1. Insert micro SD
If you have a micro SD card. Use the pin tool and insert it in the hole to
release the tray. Insert micro SD card with the gold contacts facing down.
Close the tray.
NOTE: The micro SD card is sold separately.
Step 2. Charge the phone
Before turning on your phone, charge it fully.
Insert the small end of the USB cable into the phone.
Insert the larger end into the charger and plug it into an outlet.
WARNING: Only use approved chargers with your device. Incompatible
chargers or tampering with the charger port could damage your device
and void the warranty.
Setting up your phone
Step 3. Turning your phone on/off
To turn ON, press and hold the Power/Lock button.
To turn OFF, press and hold the Power/Lock button and
follow the prompts.
NOTE: The first time you turn on your phone, you will need to activate it.
See the Activate your phone guide included with your phone.
Locking/unlocking the screen
To turn on your screen, press the Power/Lock button. Then swipe up on
the screen to unlock it.
To turn off your screen and prevent accidental key presses, press the
Power/Lock button.
To Next Page
Loading...
Need help?
General
