Need help?Do you have a question about the Vermeer S450TX and is the answer not in the manual?
General| Engine | Kubota |
|---|---|
| Gross Horsepower | 24.8 hp |
| Tipping Capacity | 2571 lb (1166.2 kg) |
| Rated Operating Capacity | 899 lb (407.8 kg) |
| Hydraulic Flow | 12.5 gpm |
| Engine Make | Kubota |
| Gross Power | 24.8 hp |
| Operating Weight | 3, 450 lbs |
| Auxiliary Hydraulic Flow | 12.5 gpm |
| Horsepower | 24.8 hp |
| Hydraulic System Flow | 12.5 gpm |
| Fuel Capacity | 9.5 gal |
| Width | 35.5 inches |
Explains the manual's purpose, content, and general safety advice.
Details warranty period, terms, responsibilities, and exclusions.
Explains symbols, signal words, and critical safety warnings.
Warns about silica exposure risks and outlines control measures and guidelines.
Details diesel and biodiesel fueling requirements and considerations.
Describes approved applications and warns against using unauthorized attachments.
Explains the telematics system, data collection, and user access.
Details ignition, throttle, auxiliary outlets, and indicator lights.
Describes control station layout, joysticks, levers, and selector switches.
Covers operator presence, park brake, lockout override, fuses, and relays.
Step-by-step engine start, cold weather, and jump-starting procedures.
Step-by-step procedure for safely shutting down the machine.
Covers loading, unloading, driving onto/off trailers, and crane loading.
Detailed instructions for towing a disabled machine and cleaning the equipment.
Covers operator requirements, jobsite assessment, and hazard identification.
Details required PPE, safety clothing, hearing, and eye protection.
Warns about utility hazards and instructs to locate utilities before digging.
Guides for attaching/removing attachments and connecting/disconnecting hydraulics.
Details load capacities and essential driving safety precautions.
Covers safe driving, hazard avoidance, slope operation, and bucket usage.
Covers maintenance safety, precautions, and importance of safety signs.
Procedures for installing/removing lift arm support bar and machine shields.
Comprehensive table detailing maintenance tasks based on operating hours.
To Next Page
