Do you have a question about the Vermeiren Luna 2 and is the answer not in the manual?
Foldable | Yes |
---|---|
Type | Wheelchair |
Seat Width | 40 cm |
Wheel Size | 24 inches |
Frame Material | Aluminum |
Specifies the nursing bed's purpose, patient suitability, and operating environment.
Identifies and illustrates the various parts of the Luna 2 nursing bed.
Details the bed's dimensions, weight, load capacity, electrical, and environmental specifications.
Provides a guide to understanding the safety and operational symbols used in the manual.
Lists optional accessories that can be used with the nursing bed.
Presents essential safety warnings and precautions for using the nursing bed.
Explains the handset's lock feature for disabling/enabling functions.
Details how to secure and release the bed's steering casters.
Instructions for cable strain relief and safe power cable positioning.
Procedure for manually lowering the headrest in case of motor failure.
Instructions for adjusting and lowering side railings on specific models.
Instructions for adjusting and lowering side railings for the Luna UL 2 model.
Step-by-step guide for mounting the lifting pole onto the bed.
How to adjust the leg support height using the Rastomat mechanism.
Safety precautions and steps for safely transferring a patient into/out of the bed.
Procedures and safety warnings for transporting the bed, including using a transport set.
Details on internal cable management and remarks on electromagnetic compatibility.
Lists the tools needed for setting up the bed; no special tools are required.
Details the components included with the delivery of Luna 2, Basic 2, and UL 2 models.
General safety precautions and steps for assembling the nursing bed.
Instructions for mounting the head and feet panels onto the slatted frame.
Steps for assembling and connecting the slatted frames of the bed.
Procedure for installing wooden side railings on Luna 2 and Luna Basic 2 models.
Procedure for installing wooden side railings on the Luna UL 2 model.
Details on connecting the transformer and electrical components of the bed.