Need help?Do you have a question about the Vermona kick lancet and is the answer not in the manual?
Connect the provided power supply unit to KICK LANCET's 12 VDC jack and understand power supply requirements.
Details on DECAY, PITCH, BEND, TIME, FM FREQ, FM INT, ATTACK, NOISE, WAVE, BALLS, and VOLUME controls.
Explanation of the TRIG button's manual trigger and tap tempo functions, and the OVERKILL switch.
Information on 12 VDC power input, MIDI IN/THRU, and AUDIO OUTPUT jack.
Procedure to change the default MIDI channel and note number for KICK LANCET.
Instructions to reset MIDI channel and note number settings to factory defaults.
Using a 5 volts gate signal for triggering, with options for fixed or dynamic volume.
Triggering via simple switch contact or any audio source, with sensitivity adjustments.
To Next Page
General